Related papers: A review and prospects for Nb3Sn superconductor de…
We propose to use superconductor-magnet multi-layer structure to achieve high critical current density by invoking polaronic mechanism of pinning. The magnetic layers should have large magnetic susceptibility to enhance the coupling between…
We have fabricated a series of ex situ copper sheathed powder-in-tube MgB2 wires with 20% by volume Ag, Pb, In, and Ga metal added to the MgB2 powder. We find the transport critical current of these wires increases significantly with the…
In the present investigation, we report a systematic study of Ag admixing in MgB2 prepared by solid-state reaction at ambient pressure. All the samples in the present investigation have been subjected to structural/ microstructural…
Critical current density (Jc) is one of the major limiting factors for high field applications of iron-based superconductors. Here, we report that Mn-ions are successfully incorporated into nontoxic superconducting (Li,Fe)OHFeSe films.…
We report a pronounced peak effect in the magnetization and the magnetocaloric coefficient in a single crystal of the superconductor Nb3Sn. As the origin of the magnetization peak effect in classical type-II superconductors is still…
We propose an inductive method to measure critical current density $J_c$ in bulk superconductors. In this method, an ac magnetic field is generated by a drive current $I_0$ flowing in a small coil mounted just above the flat surface of…
The pinning force density $F{_p}(J{_c},B)=J{_c} \times B$ (where $J_c$ is the critical current density and $B$ is the magnetic field) is one of the main parameters that characterize the resilience of a superconductor to carry a…
The results of a linear elasticity analysis yields that nano-rod inclusions aligned along the c axis of a thin film of YBa2Cu3O{7-delta}, such as BaZrO3 and BaSnO3, squeeze that matrix by pure shear. The sensitivity of the superconducting…
Superconducting performance is tunable not only via chemical modification or defect engineering, but also through external parameters such as pressure, though this method remains less readily accessible. In this work, we study how…
The ITER cable-in-conduit conductors (CICCs) are built up from sub-cable bundles, wound in different stages, which are twisted to counter coupling loss caused by time-changing external magnet fields. The selection of the twist pitch lengths…
We demonstrate experimentally that the critical current in superconducting NbTiN wires is dependent on their geometrical shape, due to current-crowding effects. Geometric patterns such as 90 degree corners and sudden expansions of wire…
We have studied the influence of the patterning procedure on the critical current density of high-$T_c$ YBa$_2$Cu$_3$O$_{7-\delta}$ thin rings using the nonlinear ac susceptibility method. At no applied dc magnetic field we have found that…
The critical current density Jc in high-Tc superconductors (HTS) often shows a maximum at field far above the self-field. We study this peak effect(PE) with the nonlinear I-V response of type-II superconductors and find analytical equation…
LHC still does not operate at full energy due to training features in magnets. Higher field practical superconductors (Nb3Sn) show much worse training behavior than NbTi. Most magnet performance issues relate to quenching, and it is this…
Since the discovery of high-$T_c$ cuprates the quest for new superconductors has shifted toward more anisotropic, strongly correlated materials with lower carrier densities and competing magnetic and charge density wave orders. While these…
In order to understand why the inter- and intra-granular current densities of polycrystalline superconducting oxypnictides differ by three orders of magnitude, we have conducted combined magneto-optical and microstructural examinations of…
We study the effect of neutron irradiation on the critical current density Jc of isotopically pure polycrystalline Mg11B2 samples. For fluences in the range 1017-1018 cm-2, Jc is enhanced and its dependence on magnetic field is…
A method is proposed for estimating the length scale of currents circulating in superconductors. The estimated circulation radius is used to determine the critical current density on the basis of magnetic measurements. The obtained formulas…
We study mechanisms of vortex nucleation in Nb$_3$Sn Superconducting RF (SRF) cavities using a combination of experimental, theoretical, and computational methods. Scanning transmission electron microscopy (STEM) image and energy dispersive…
Continued advances in superconducting qubit performance require more detailed understandings of the many sources of decoherence. Within these devices, two-level systems arise due to defects, interfaces, and grain boundaries, and are thought…