Related papers: Fabrication of highly dense isotropic Nd-Fe-B bond…
Spintronics has emerged as a field of vast applicability, and layered magnetic materials have served as a ground for advancement in this direction. Here, we report the synthesis and detailed magnetic and specific heat studies on NdSbSe, (a…
Hot deformation process is one of the primary methods to produce anisotropic rare earth permanent magnets. Firstly, rapidly quenched powder flakes with nanocrystal structure are condensed into the full dense isotropic precursors by hot…
The understanding of coercivity mechanism in high performance Nd-Fe-B permanent magnets relies on the analysis of the magnetic properties of all phases present in the magnets. By adding Cu in such compounds, a new Nd6Fe13Cu grain boundary…
Magnetic anisotropy is a key parameter of magnetic materials as it decides the response in the presence of an external magnetic field. The artificial tailoring of magnetic anisotropy by manipulating surface and interface morphology is…
The hydrostatic pressure is expected to be an effective knob to tune the magnetostructural phase transitions of hexagonal MMX alloy. In this study, magnetization measurements under hydrostatic pressure were performed on a MMX martensitic…
We investigate submicron ferromagnetic PdNi thin-film strips intended as contact electrodes for carbon nanotube-based spintronic devices. The magnetic anisotropy and micromagnetic structure are measured as function of temperature and aspect…
We have studied the hard magnetic properties of the low-temperature phase of MnBi with first principle calculations based on the density functional theory. The calculations have been carried out on two distinct unit cell configurations MnBi…
Heusler alloys have attracted interest in various fields of functional materials since their properties can quite easily be tuned by composition. Here, we have investigated the relatively new class of all-3d Heusler alloys in view of its…
Combining multiple degrees of freedom in strongly-correlated materials such as transition-metal oxides would lead to fascinating magnetic and magnetocaloric features. Herein, the strain effects are used to markedly tailor the magnetic and…
We present a comprehensive investigation of structural, magnetic and transport properties of Ni$_2$FeAl Heusler alloy nanoparticles (NPs) synthesized via template-less chemical route. The NPs exhibit high saturation magnetization of 3.02…
ThMn12-type (Sm,Zr)1(Fe,Co,Ti)12 compounds show great potential for permanent magnets. Magnetically hard anisotropic powders prepared via reduction-diffusion exhibit a significant increase in coercivity from 0.45 T to 1.26 T as the…
We present a theory of magnetic anisotropy in ${\rm III}_{1-x}{\rm Mn}_{x}{\rm V}$ diluted magnetic semiconductors with carrier-induced ferromagnetism. The theory is based on four and six band envelope functions models for the valence band…
In this study, severe plastic deformation by high pressure torsion is used as a fabrication method for nanocrystalline magnetic CuCo alloys in bulk quantities. By subsequent isothermal annealing, phase separation of the supersaturated solid…
Additive manufacturing is becoming a technique with great prospects for the production of components with new designs or shapes that are difficult to obtain by conventional manufacturing methods. One of the most promising techniques for…
In the paper we present the results of extensive studies of palladium-rich Pd1-xFex alloy films epitaxially grown on MgO single-crystal substrate. In a composition range of x = 0.01-0.07 these materials are soft ferromagnets, the saturation…
Single crystals of CrSbSe$_3$, a structurally pseudo-one-dimensional ferromagnetic semiconductor, were grown using a high-temperature solution growth technique and were characterized by x-ray diffraction, anisotropic, temperature- and…
In material extrusion additive manufacturing, the extrusion process is commonly controlled in a feed-forward fashion. The amount of material to be extruded at each printing location is pre-computed by a planning software. This approach is…
This article reports the successful synthesis of single crystalline two-dimensional thin flakes of NbSe$_2$. The XRD pattern of the grown crystal ensured its crystallization in a single phase with a hexagonal structure. The EDAX endorsed…
Media with engineered magnetization are essential building blocks in superconductivity, magnetism and magnon spintronics. However, the established thin-film and lithographic techniques insufficiently suit the realization of planar…
Two-dimensional ferromagnets with strong perpendicular magnetic anisotropy exhibit magnetic order down to the monolayer thickness, beneficial for energy-efficient spintronic devices. In this work, molecular beam epitaxy has been employed to…