Related papers: Fabrication of highly dense isotropic Nd-Fe-B bond…
The maximum coercivity that can be achieved for a given hard magnetic alloy is estimated by computing the energy barrier for the nucleation of a reversed domain in an idealized microstructure without any structural defects and without any…
We study the equation of state of electron in strong magnetic fields which are greater than the critical value $B_c \simeq 4.4 \times 10^{13}$ Gauss. We find that such a strong magnetic field induces the anisotropic pressure of electron. We…
Thermoelectric energy conversion is an attractive technology for generating electricity from waste heat and using electricity for solid-state cooling. However, conventional manufacturing processes for thermoelectric devices are costly and…
Recent advances in the understanding and control of quantum technologies, such as those based on cold atoms, have resulted in devices with extraordinary metrological sensitivities. To realise this potential outside of a lab environment the…
Mixtures of Fe and Cu powders are cold-compacted and subsequently deformed with severe plastic deformation by high-pressure torsion, leading to bulk samples. The dilution of Fe in the Cu matrix is investigated with SQUID-magnetometry,…
The structural and magnetic properties of Pr-alloyed MnBi (short MnBi-Pr) nanostructures with a range of Pr concentrations have been investigated. The nanostructures include thin films having Pr concentrations 0, 2, 3, 5 and 9 atomic…
Nanostructured Pd-Fe thin films with varied Fe content were prepared by electrodeposition technique from organic electrolytes on Cu and brass substrates. The structure and the magnetic properties of the films were investigated prior to…
Electronic structure analysis is performed to study the properties of several Pb-containing 3d-intermetallics. Our study reveals that binary metastable Co3Pb and Fe3Pb intermetallic compounds exhibit very attractive intrinsic magnetic…
High energy density magnets are preferred over induction magnets for many applications, including electric motors used in flying rovers, electric vehicles, and wind turbines. However, several issues related to cost and supply with…
There is evidence that magnetism can potentially increase the thermopower of materials, most likely due to magnon scattering, suggesting the incorporation of intrinsic magnetic semiconductors in non-magnetic thermoelectric materials. Here,…
By means of temperature and wavelength-dependent small-angle neutron scattering (SANS) experiments on sintered isotropic and textured Nd-Fe-B magnets we provide evidence for the existence of an anisometric structure in the microstructure of…
Due to the limited rare-earth elements resources, ferrite magnets need to be improved drastically. Ideally, for a true hard magnet, the coercive field should be larger than the saturation magnetization, which is not yet realized for…
We report high-temperature (300-1120 K) magnetization data of Fe and Fe3O4 nanoparticles embedded in multi-walled carbon nanotubes. The magnetic impurity concerntations are precisely determined by both high-energy synchrotron x-ray…
Low-temperature MnBi (hexagonal NiAs phase) exhibits anomalies in the lattice constants (a, c) and bulk elastic modulus (B) below 100 K, spin reorientation and magnetic susceptibility maximum near 90 K, and, importantly for high-temperature…
We report on the magnetic and hyperthermia properties of iron nanoparticles synthesized by organometallic chemistry. They are 5.5 nm in diameter and display a saturation magnetization close to the bulk one. Magnetic properties are dominated…
3D-printed digital materials whose mechanical behavior travels between those from thermoplastic to rubbery polymers have become increasingly important. However, their mechanical functionalities have not been fully exploited due to intrinsic…
Laser powder bed fusion is a well-established additive manufacturing method that can be used for the production of net-shaped Nd-Fe-B sintered magnets. However, low coercivity has been one of the drawbacks in the laser powder bed fusion…
We have explored, computationally and experimentally, the magnetic properties of \fecob{} alloys. Calculations provide a good agreement with experiment in terms of the saturation magnetization and the magnetocrystalline anisotropy energy…
We have performed a combined first-principles and micromagnetic study on the strain effects in Nd-Fe-B magnets. First-principles calculations on Nd2Fe14B reveal that the magnetocrystalline anisotropy (K) is insensitive to the deformation…
Although 3D printing has the potential to transform manufacturing processes, the strength of printed parts often does not rival that of traditionally-manufactured parts. The fused-filament fabrication method involves melting a…