Related papers: Simultaneous Transmit and Receive Operation in Nex…
Ever since the feasibility of in-band full-duplex (FD) at the Physical (PHY) layer has been established, several studies have emerged investigating protocol aspects of enabling FD operation in various legacy wireless technologies. Recently,…
The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral…
Full Duplex (FD) technology is considered as one of the next big leap in the evolution of modern WLANs. Allowing a node to simultaneously transmit a data frame while in receive mode, can theoretically double the system throughput. However,…
Recently, several working implementations of in--band full--duplex wireless systems have been presented, where the same node can transmit and receive simultaneously in the same frequency band. The introduction of such a possibility at the…
In-Band Full-Duplex (IBFD) is a technique that enables a wireless node to simultaneously transmit a signal and receive another on the same assigned frequency. Thus, IBFD wireless systems can provide up to twice the channel capacity compared…
Recent achievement in self-interference cancellation algorithms enables potential application of full-duplex (FD) in 5G radio access systems. The exponential growth of data traffic in 5G can be supported by having more spectrum and higher…
Full-duplex (FD) technology is envisaged as a key component for future mobile broadband networks due to its ability to boost the spectral efficiency. FD systems can transmit and receive simultaneously on the same frequency at the expense of…
This paper investigates the throughput for wireless network with full-duplex radios using stochastic geometry. Full-duplex (FD) radios can exchange data simultaneously with each other. On the other hand, the downside of FD transmission is…
Full-duplex (FD) technique can remarkably boost the network capacity in the millimeter wave (mmWave) bands by enabling simultaneous transmission and reception. However, due to directional transmission and large bandwidth, the throughput and…
Focusing on the increasing market of the sensors and actuators networks, the IEEE 802.11ah Task Group is currently working on the standardization of a new amendment. This new amendment will operate at the sub-1GHz band, ensure transmission…
In this paper, we present an experimental and simulation based study to evaluate the use of full-duplex as a mode in practical IEEE 802.11 networks. To enable the study, we designed a 20 MHz multi-antenna OFDM full-duplex physical layer and…
The recent developments in self-interference (SI) cancellation techniques have led to the practical realization of full-duplex (FD) radios that can perform simultaneous transmission and reception. FD technology is attractive for various…
Recent work has shown the feasibility of single-channel full-duplex wireless physical layer, allowing nodes to send and receive in the same frequency band at the same time. In this report, we first design and implement a real-time…
In the last years, the advancements in signal processing and integrated circuits technology allowed several research groups to develop working prototypes of in-band full-duplex wireless systems. The introduction of such a revolutionary…
In-band full-duplex (FD) communication is considered a potential candidate to be adopted by the fifth generation (5G) cellular networks. FD communication renders the entire spectrum simultaneously accessible by uplink and downlink, and…
The idea of in-band full-duplex (FD) communications revives in recent years owing to the significant progress in the self-interference cancellation and hardware design techniques, offering the potential to double spectral efficiency. The…
Next-generation 802.11ax WLANs will make extensive use of multi-user communications in both downlink (DL) and uplink (UL) directions to achieve high and efficient spectrum utilization in scenarios with many user stations per access point.…
The increasingly demanding objectives for next generation wireless communications have spurred recent research activities on multi-antenna transceiver hardware architectures and relevant intelligent communication schemes. Among them belong…
In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the…
Full-duplex (FD) systems have emerged as an es- sential enabling technology to further increase the data rate of wireless communication systems. The key idea of FD is to serve multiple users over the same bandwidth with a base station (BS)…