Related papers: Large amplitude tip/tilt estimation by geometric d…
The phase diversity technique is a useful tool to measure and pre-compensate for quasi-static aberrations, in particular non-common path aberrations, in an adaptive optics corrected imaging system. In this paper, we propose and validate by…
A new method for absolute polarimetric calibration of large telescopes is presented. The proposed method is highly accurate and is based on the calibration of a small sub-aperture, which is then extended to the full system by means of…
One of the problems of producing spectrographs for Extremely Large Telescopes (ELTs) is that the beam size is required to scale with telescope aperture if all other parameters are held constant, leading to enormous size and implied cost.…
We present a new method to achieve high-contrast images using segmented and/or on-axis telescopes. Our approach relies on using two sequential Deformable Mirrors to compensate for the large amplitude excursions in the telescope aperture due…
In the rapidly evolving field of optical engineering, precise alignment of multi-lens imaging systems is critical yet challenging, as even minor misalignments can significantly degrade performance. Traditional alignment methods rely on…
Focal plane wavefront sensing is an appealing technique to cophase multiple aperture telescopes. Phase diversity, operable with any aperture configuration or source extension, generally suffers from high computing load. In this Letter, we…
We present the updated design of HighSpec, a high-resolution $\mathcal{R} \sim 20,000$ spectrograph designed for the Multi Aperture Spectroscopic Telescope (MAST). HighSpec offers three observing modes centered at the Ca II H&K, Mg b…
We propose a novel method for large-scale image stitching that is robust against repetitive patterns and featureless regions in the imagery. In such cases, state-of-the-art image stitching methods easily produce image alignment artifacts,…
Capturing more information, e.g. geometry and material, using optical cameras can greatly help the perception and understanding of complex scenes. This paper proposes a novel method to capture the spectral and light field information…
Photon-counting computed tomography has demonstrated significant advancements in recent years; however, micro photon-counting CT (Micro-PCCT) systems are still limited by pixel-wise detector response nonuniformity, which degrades…
Strong multiple scattering of the probe in scanning transmission electron microscopy (STEM) means image simulations are usually required for quantitative interpretation and analysis of elemental maps produced by electron energy-loss…
The Large Array Survey Telescope (LAST) is a wide-field telescope designed to explore the variable and transient sky with a high cadence and to be a test-bed for cost-effective telescope design. A LAST node is composed of 48 (32 already…
One of the well-known problems of producing instruments for Extremely Large Telescopes is that their size (and hence cost) scales rapidly with telescope aperture. To try to break this relation alternative new technologies have been…
Pre-trained multi-modal models, such as CLIP, provide transferable embeddings and show promising results in diverse applications. However, the analysis of learned multi-modal embeddings is relatively unexplored, and the embedding…
One of the problems of producing instruments for Extremely Large Telescopes is that their size (and hence cost) scales rapidly with telescope aperture. To try to break this relation alternative new technologies have been proposed, such as…
We observed Proxima Centauri with the Spitzer Space Telescope InfraRed Array Camera (IRAC) five times in 2016 and 2017 to search for transits of Proxima Centauri b. Following standard analysis procedures, we found three asymmetric,…
It has been recently demonstrated that integrated optics could enhance accuracy, stability, and ease of use of stellar interferometry techniques. The subject of this thesis is the study of an optical component based on singlemode waveguides…
We propose algorithms based on an optimisation method for inverse multislice ptychography in, e.g. electron microscopy. The multislice method is widely used to model the interaction between relativistic electrons and thick specimens. Since…
We develop three inverse elastic scattering schemes for locating multiple small, extended and multiscale rigid bodies, respectively. There are some salient and promising features of the proposed methods. The cores of those schemes are…
In this paper we proposed a novel overlay alignment method using two sets of identical photonic crystals (PhCs). In this method the reflection or transmission spectrum of the two overlaid photonic crystals is measured to help wafer tilt,…