Related papers: Photocurrent enhancement of spin coated CdS thin f…
CdS samples were synthesized on amorphous glass and conductive glass substrates at room temperature using spin coating technique and subsequently annealed at five different temperatures in air for one hour. The speed and time of spin…
Spin coating technique was employed to fabricate CuO films at different spin speeds for different time duration, and they were annealed at different temperatures for different time durations in air. These thin films were characterized using…
CdS thin film samples were fabricated using spin coating technique on normal glass and conductive glass substrates and annealed at different temperatures. According to the XRD patterns of films prepared on normal glass substrates,…
Spin coating technique was used to synthesize pure ZnO and Cu doped ZnO films on amorphous and conducting glass substrates. The doped amount of Cu in ZnO was varied up to 5% in atomic percentage. Speed of spin coating system, coating time,…
Sol-gel spin coating technique was employed to synthesize CuO thin films at 1500 rpm, 2200 rpm and 2400 rpm for 30 seconds, and subsequently annealed at 150-550{\deg}C for 1 hour. Multi-layered CuO thin films with 3 and 5 layers were…
Cu doped transparent ZnO thin films were spin coated on conductive glass substrates. The samples were subsequently annealed in air for 1 hour at 500 0C in order to form the phase of ZnO. ZnO samples were doped with different Cu molar…
Thin films of Zn2+ doped cupric oxide (CuO) were synthesized using spin coating technique starting from a solution with Cu and Zn. The speed of spin coating and time duration were varied to fabricate a film with required uniform thickness.…
The effects of thickness, doping concentration and recombination of AlSb films on the performance of CdS/AlSb cells are simulated by one dimensional simulation program called analysis of microelectronic and photonic structures(AMPS1D) soft…
Metal sulfides are emerging as an important class of materials for photocatalytic applications, because of their high photo responsive nature in the wide visible light range. CdS in this class of materials, have a direct band gap of 2.4 eV,…
We study experimentally the photoconductivity of CdS-CdSe sintered granular films obtained by the screen printing method. We mostly focus on the dependences of photoconductivity on film's microstructure, which varies with changing…
Thin-film solar cells that are considered as the second generation of solar cells are known for their low cost and acceptable efficiency. In this technology, semiconductor layers with a thickness of micrometer are deposited on thick enough…
Coating and reflecting thin films for energy harvesting purposes are interesting topics in both theoretical and experimental research. The thin film could help to enhance the absorption of the system via its specific optical properties…
The electrical conductivity of a CdS thin film, controlled by grain structures is essential to enhance its photoconductivity to be able to be fit as a window material in CdS/CdTe heterojunction solar cell. In order to characterize a thin…
Co-evaporation of Cu-KF-In-Se was performed on substrates with varied surface Na compositions. Compositions of interest for photovoltaic absorbers were studied, with ratios of (K+Cu)/In ~ 0.85 and K/(K+Cu) ~ 0 - 0.57. Soda-lime glass (SLG)…
This work presents a cost-effective alternative technology for the formation of nanostructured semiconductor materials for tunable light emitting devices. CdS and ZnS semiconducting colloid nanoparticles coated with organic shell,…
Solar cells based on kesterite-type $Cu_2ZnSnS_4$ (CZTS) thin films were fabricated using a chemical route to prepare the $CZTS$ films, consisting in sequential deposition of $Cu_2SnS_3$ (CTS) and $ZnS$ thin films followed by annealing at…
Development of alternative thin film photovoltaic technologies is an important research topic due to the potential for low-cost, large-scale fabrication of high-efficiency solar cells. Despite the large number of promising alternative…
We propose a low-cost approach for the synthesis of multifunctional CuSnS3 (CTS) ternary compound thin film via spray pyrolysis technique. By varying Sn and S doping concentrations, a high energy absorber layers of CuSnS3 thin films were…
A 2-D photonic crystal was integrated experimentally into a thin-film crystalline-silicon solar cell of 1-{\mu}m thickness, after numerical optimization maximizing light absorption in the active material. The photonic crystal boosted the…
Thin films of CdTe were deposited on glass substrates by thermal evaporation. From the XRD measurements itis found that the films are of zinc-blende-type structure. Transmittance, absorption, extinction, and refractive coefficients are…