Related papers: Spatially Resolved Thermometry of Resistive Memory…
In this laboratory-based study, a plate was designed, manufactured and then characterised thermally and dimensionally using a thermal imager. This plate comprised a range of known scratch, dent, thinning and pitting artefacts as mimics of…
Cryogenic low noise amplifiers based on high electron mobility transistors (HEMTs) are widely used in applications such as radio astronomy, deep space communications, and quantum computing, and the physical mechanisms governing the…
We report the design and performance of a cryogen-free, pulse-tube refrigerator (PTR)-based scanning probe microscopy (SPM) system capable of operating at the base temperature of near 5K. We achieve this by combining a home-made interface…
We report device level damping measurements using spin-torque driven ferromagnetic resonance on perpendicular magnetic random-access memory (MRAM) cells. It is shown that thermal agitation enhances the apparent damping for cells smaller…
Resistance thermometry is a time-tested method for taking temperature measurements. In recent years fundamental limits to resistance-based approaches spurred considerable interest in developing photonic temperature sensors as a viable…
In nanomechanical photothermal absorption spectroscopy and microscopy, the measured substance becomes a part of the detection system itself, inducing a nanomechanical resonance frequency shift upon thermal relaxation. Suspended,…
Measuring thermodynamic quantities can be easy or not, depending on the system that is being studied. For a macroscopic object, measuring temperatures can be as simple as measuring how much a column of mercury rises when in contact with the…
Understanding heat transport at the nanometer scale is critical for semiconductor devices, quantum materials, and thermal management of nanostructures, yet direct local measurements of thermal conductivity and heat capacity remain scarce.…
We present a comprehensive investigation of self-heating in gallium nitride (GaN) high-electron-mobility transistors (HEMTs) through technology computer-aided design (TCAD) simulations and phonon Monte Carlo (MC) simulations. With…
A quasi-optical (QO) test bench was designed, simulated, and calibrated for characterizing S-parameters of devices in the 220-330 GHz (WR-3.4) frequency range, from room temperature down to 4.8 K. The devices were measured through vacuum…
This work builds on the previous introduction [1] of a coupled experimental-computational system devised to fully characterize the thermal behavior of complex 3D submicron electronic devices. The new system replaces the laser-based surface…
X-ray calorimetric sample platforms combining specific heat and synchrotron x-ray measurements provide a powerful means to investigate fundamental material properties. Calorimeter cell designs featuring a compact heater and thermometer…
Titanium trisulfide (TiS3) has recently attracted the interest of the 2D community as it presents a direct bandgap of ~1.0 eV, shows remarkable photoresponse, and has a predicted carrier mobility up to 10000 cm2V-1 s-1. However, a study of…
Thermal resistances from interfaces impede heat dissipation in micro/nanoscale electronics, especially for high-power electronics. Despite the growing importance of understanding interfacial thermal transport, advanced thermal…
Accurate on-chip temperature sensing is critical for the optimal performance of modern CMOS integrated circuits (ICs), to understand and monitor localized heating around the chip during operation. The development of quantum computers has…
Specific heat is a powerful probe offering insights into the entropy and excitation spectrum of the studied material. While it is well established, a key challenge remains the measurements of microcrystals or thin films especially in the…
An instrument for the simultaneous characterization of thin films by Raman spectroscopy and electronic transport down to 3.7 K has been designed and built. This setup allows for the in-situ preparation of air-sensitive samples, their…
Emerging analog resistive random access memory (RRAM) based on HfOx is an attractive device for non-von Neumann neuromorphic computing systems. The differences in temperature dependent conductance drift among cells hamper computing…
Leveraging the latent heat of phase change materials (PCMs) can reduce the peak temperatures and transient variations in temperature in electronic devices. But as the power levels increase, the thermal conduction pathway from the heat…
PrMnO3 (PMO) based Resistance Random Access Memory (RRAM) has recently been considered for selector-less RRAM and neuromorphic computing applications by utilizing its current shoot-up. This current shoot-up in the PMO device is attributed…