Related papers: Reflective Metal/Semiconductor Tunnel Junctions fo…
Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and…
As UV LEDs are explored at shorter wavelengths (< 280 nm) into the UVC spectral range, the crystalline quality of epitaxial AlGaN films with high Al compositions and inefficient hole injection from p-type AlGaN severely limit the LED…
We discuss the engineering of p-AlGaN cladding layers for achieving efficient tunnel-injected III-Nitride ultraviolet light emitting diodes (UV LEDs) in the UV-A spectral range. We show that capacitance-voltage measurements can be used to…
We report on tunnel-injected deep ultraviolet light emitting diodes (UV LEDs) configured with a polarization engineered Al0.75Ga0.25N/ In0.2Ga0.8N tunnel junction structure. Tunnel-injected UV LED structure enables n-type contacts for both…
Ultraviolet (UV) light emission at 229 nm wavelength from diode structures based on AlN/Al0.77Ga0.23N quantum wells and using p-type Si to significantly increase hole injection was reported. Both electrical and optical characteristics were…
Ultra-violet emitters have several applications in the areas of sensing, water purification, and data storage. While the III-Nitride semiconductor system has the band gap region necessary for ultraviolet emission, achieving efficient…
Polarization engineered interband tunnel junctions (TJs) are integrated in nanowire ultraviolet (UV) light emitting diodes (LEDs). A ~6V reduction in turn-on voltage is achieved by the integration of tunnel junction at the base of…
The lattice mismatch between AlGaN and AlN substrates limits the design and efficiency of UV LEDs, but it can be mitigated by the co-incorporation of boron. We employ hybrid density functional theory to investigate the thermodynamic,…
Transitioning to solid-state ultraviolet (UV) lighting is critical for reducing global energy utilization to meet net-zero targets. AlGaN-based far-UVC LEDs offer a mercury-free, energy-efficient alternative to conventional mercury lamps,…
Ultra-wide bandgap (UWBG) materials hold immense potential for high-power RF electronics and deep ultraviolet photonics. Among these, AlGaN emerges as a promising candidate, offering a tunable bandgap from 3.4 eV (GaN) to 6.1 eV (AlN) and…
AlN is an ultra-wide bandgap semiconductor which has been developed for applications including power electronics and optoelectronics. Thermal management of these applications is the key for stable device performance and allowing for long…
Deep ultraviolet (UV) optical emission below 250 nm (~5 eV) in semiconductors is traditionally obtained from high aluminum containing AlGaN alloy quantum wells. It is shown here that high-quality epitaxial ultrathin binary GaN quantum disks…
Enhanced interband tunnel injection of holes into a PN junction is demonstrated using P-GaN/InGaN/N-GaN tunnel junctions with a specific resistivity of 1.2 X 10-4 {\Omega} cm2. The design methodology and low-temperature characteristic of…
Ultrawide bandgap heterojunction p-n diodes with polarization-induced AlGaN p-type layers are demonstrated using plasma-assisted molecular beam epitaxy on bulk AlN substrates. Current-voltage characteristics show a turn on voltage of…
We demonstrate efficient spin-polarized tunneling between a ferromagnetic metal and a ferromagnetic semiconductor with highly mismatched conductivities. This is indicated by a large tunneling magnetoresistance (up to 30%) at low…
InGaN/GaN tunnel junction contacts were grown on top of an InGaN/GaN blue (450 nm) light emitting diode wafer using plasma assisted molecular beam epitaxy. The tunnel junction contacts enable low spreading resistance n-GaN top contact layer…
Better wall plug efficiency of deep-ultraviolet light emitting diodes (DUV-LEDs) requires simultaneous low resistivity p-type and n-type contacts, which is a challenging problem. In this study, the co-optimization of p-InGaN and n- AlGaN…
First-principles investigations of the structural, electronic and magnetic properties of Cr-doped AlN/GaN (0001) heterostructures reveal that Cr segregates into the GaN region, that these interfaces retain their important half-metallic…
We have successfully fabricated Cu/AlOx-Al/Nb normal-metal/insulator/superconductor tunnel junction devices with a high value of the superconducting gap (up to $\sim 1$ mV), using electron-beam lithography and angle evaporation techniques…
We report on the illustration of the first electron blocking layer (EBL) free AlInN nanowire light-emitting diodes (LEDs) operating in the deep ultraviolet (DUV) wavelength region (sub-250 nm). We have systematically analyzed the results…