Related papers: Origin of Operating Voltage Increase in InGaN-base…
In this paper, we aim to understand the apparent characteristics of IQE and I-V curve in AlGaInP and InGaN LED devices. For the analysis, we separate the current into radiative current and non-radiative current component by using the…
We report on the unambiguous detection of Auger electrons by electron emission spectroscopy from a cesiated InGaN/GaN light emitting diode (LED) under electrical injection. Electron emission spectra were measured as a function of the…
We investigated the origin of the high reverse leakage current in light emitting diodes (LEDs) based on (In,Ga)N/GaN nanowire (NW) ensembles grown by molecular beam epitaxy on Si substrates. To this end, capacitance deep level transient…
Red InGaN-based light-emitting diodes (LEDs) exhibit lower internal quantum efficiencies (IQEs) than violet, blue, and green InGaN LEDs due to a reduction in radiative recombination rates relative to non-radiative recombination rates as the…
Carrier recombination and transport processes play key roles in determining the optoelectronic performances such as the efficiency droop and forward voltage in InGaN/GaN multiple-quantum-well (MQW) light-emitting diodes (LEDs). In this…
Efficiency droop effect under high injection in GaN-based light emitting diodes (LEDs) strongly depends on wavelength, which is still not well understood. In this paper, through differential carrier lifetime measurements on commercialized…
The turn-on voltage of an LED is an important parameter as it determined the power consumption of the LED and influences the effective power conversion efficiency.
III-Nitride light emitting diodes (LEDs) are widely used in a range of high efficiency lighting and display applications, which have enabled significant energy savings in the last decade. Despite the wide application of GaN LEDs, transport…
InGaN-based light emitting diodes (LEDs) are known to suffer from low electron and hole wavefunction overlap due to high piezoelectric field. Staggered InGaN quantum wells (QWs) have been proposed to increase the wavefunction overlap and…
We fabricated polygonal nanoholes in the top p-GaN layer of the InGaN/GaN light-emitting diode, followed by the deposition of Au/Al metal thin film within the nanoholes to create metal microcavities, thereby constructing the surface plasmon…
Trench defects in multi-quantum wells (MQWs) have been considered as flawed structures that severely degrade the internal quantum efficiency of light-emitting diodes (LEDs) in the past. In this research, trench defects are innovatively…
White light emitting diodes based on III-nitride InGaN/GaN quantum wells currently offer the highest overall efficiency for solid state lighting applications. Although current phosphor-converted white LEDs have high electricity-to-light…
Recently, the use of bottom-TJ geometry in LEDs, which achieves N-polar-like alignment of polarization fields in conventional metal-polar orientations, has enabled enhancements in LED performance due to improved injection efficiency. Here,…
In the experimental electroluminescence (EL) spectra of light-emitting diodes (LEDs) based on N-polar (In,Ga)N/GaN nanowires (NWs), we observed a double peak structure. The relative intensity of the two peaks evolves in a peculiar way with…
In a recent letter [Phys. Rev. Lett. 110, 177406 (2013)], presenting a spectroscopic study of the electrons emitted from the GaN p-cap of a forward-biased InGaN/GaN light-emitting diode (LED), the authors observed at least two distinct…
Low internal and external quantum efficiencies in high Aluminium content AlGaN-based deep-ultraviolet light-emitting diode (DUV-LED) occurred due to strong polarization effects, spontaneous and piezoelectric polarization, at the interface…
Longer wavelength emitters such as green LEDs display a pronounced efficiency drop at higher current densities, resulting in relatively low wall-plug efficiency. Multi-active region approach can improve the wall-plug efficiency…
Better wall plug efficiency of deep-ultraviolet light emitting diodes (DUV-LEDs) requires simultaneous low resistivity p-type and n-type contacts, which is a challenging problem. In this study, the co-optimization of p-InGaN and n- AlGaN…
Conduction in pristine conjugated polymers (other than polyacetylene) is by polaron hopping between sites corresponding to conjugation lengths. The strong increase of current $I$ with voltage $V$ observed for both emission-limited and ohmic…
Here, we report a comprehensive modeling framework to unravel the efficiency roll-off in Perovskite light emitting diodes (PeLEDs). Our model self-consistently accounts for a positive feedback mechanism which involves diverse phenomena like…