Related papers: Frequency-Multiplexed bias and readout of a 16-pix…
We demonstrated a laser depth imaging system based on the time-correlated single-photon counting technique, which was incorporated with a low-jitter superconducting nanowire single-photon detector (SNSPD), operated at the wavelength of 1550…
We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $\mu$m. This represents the first demonstration of a time correlated single-photon counting detector at these…
We report on simulation results that shows optimum photon absorption by superconducting nanowires can happen at a fill-factor that is much less than 100%. We also present experimental results on high performance of our superconducting…
Detecting single photons is essential for applications such as dark matter detection, quantum science and technology, and biomedical imaging. Superconducting nanowire single-photon detectors (SNSPDs) excel in this task due to their…
The observation of fast physical dynamics using optical techniques currently relies on indirect methods, such as pump-probe measurements. One reason for this is the lack of an efficient detector with high time resolution. Single-photon…
We developed a four-channel superconducting nanowire single-photon detector system based on a Gifford-McMahon cryocooler. All channels showed a system detection efficiency (at a 100 Hz dark-count rate) higher than 16% at 1550 nm wavelength,…
Statistical studies on the performance of different superconducting nanowire single-photon detectors (SNSPDs) on one chip suggested that random constrictions existed in the nanowire that were barely registered by scanning electron…
We demonstrate a scalable readout scheme for an infrared single-photon pulse-position camera consisting of WSi superconducting nanowire single-photon detectors (SNSPDs). For an N x N array, only 2 x N wires are required to obtain the…
We present a complete method to characterize multiphoton detectors with a small overall detection efficiency. We do this by separating the nonlinear action of the multiphoton detection event from linear losses in the detector. Such a…
Microwave Kinetic Inductance Detector (MKID) arrays are currently being developed and deployed for astronomical applications in the visible and near infrared and for sub-millimetre astronomy. One of the main drawbacks of MKIDs is that large…
Superconducting nanowire single-photon detectors are set apart from other photon counting technologies above all else by their extremely high speed, with few-ten-ps timing resolution, and recovery times $\tau_R\lesssim$10 ns after a…
Superconducting-nanowire single-photon detectors (SNSPDs) have enabled the realization of several quantum optics technologies thanks to their high detection efficiency, low dark-counts, and fast recovery time. However, the widespread use of…
We describe a micromachining process to allow the coupling of an array of single-mode telecommunication fibers to individual superconducting nanowire single photon detectors (SNSPDs). As proof of principle, we show the integration of four…
Single-photon detectors based on superconducting nanowires (SSPDs or SNSPDs) have rapidly emerged as a highly promising photon-counting technology for infrared wavelengths. These devices offer high efficiency, low dark counts and excellent…
Time- and number-resolved photon detection is crucial for photonic quantum information processing. Existing photon-number-resolving (PNR) detectors usually have limited timing and dark-count performance or require complex fabrication and…
We present the performances of a superconducting nanowire single-photon detector (SNSPD) in an ultralow-temperature region from 16 mK to 4 K. The system detection efficiency of the SNSPD showed saturation in the bias-current and temperature…
Conventional readout of a superconducting nanowire single-photon detector (SNSPD) sets an upper bound on the output voltage to be the product of the bias current and the load impedance, $I_\mathrm{B}\times Z_\mathrm{load}$, where…
We demonstrate a high-accuracy distributed fiber-optic temperature sensor using superconducting nanowire single-photon detectors and single-photon counting techniques. Our demonstration uses inexpensive single-mode fiber at standard…
Superconducting NbN wires have recently received attention as detectors for visible and infrared photons. We present experiments in which we use a NbN wire for high-efficiency (40 %) detection of single electrons with keV energy. We use the…
Ultra-fast single-photon detectors with high current density and operating temperature can benefit space and ground applications, including quantum optical communication systems, lightweight cryogenics for space crafts, and medical use.…