Related papers: Gbps User Rates Using mmWave Relayed Backhaul with…
Wide area networks for surveying applications, such as seismic acquisition, have been witnessing a significant increase in node density and area, where large amounts of data have to be transferred in real-time. While cables can meet these…
Future generations of cellular systems presume to use an extremely high number of antennas to enable mm waves. Increasing the number of antennas requires a growth in connections between a remote radio head (RRH) and a baseband unit (BBU).…
The massive amounts of bandwidth available at millimeter-wave frequencies (roughly above 10 GHz) have the potential to greatly increase the capacity of fifth generation cellular wireless systems. However, to overcome the high isotropic…
Next-generation wireless networks target high network availability, ubiquitous coverage, and extremely high data rates for mobile users. This requires exploring new frequency bands, e.g., mmWaves, moving toward ultra-dense deployments in…
Millimeter wave (mmWave) communication has attracted increasing attention as a promising technology for 5G networks. One of the key architectural features of mmWave is the use of massive antenna arrays at both the transmitter and the…
Communicating on millimeter wave (mmWave) bands is ushering in a new epoch of mobile communication which provides the availability of 10 Gbps high data rate transmission. However, mmWave links are easily prone to short transmission range…
Today's increasing demand for wirelessly uploading a large volume of User Generated Content (UGC) is still significantly limited by the throttled backhaul of residential broadband (typically between 1 and 3Mbps). We propose BaPu, a…
To meet the ever-increasing demands on higher throughput and better network delay performance, 60 GHZ networking is proposed as a promising solution for the next generation of wireless communications. To successfully deploy such networks,…
We propose a novel analytical framework for evaluating the coverage performance of a millimeter wave (mmWave) cellular network where idle user equipments (UEs) act as relays. In this network, the base station (BS) adopts either the direct…
Integrated access and backhaul (IAB) is one of the promising techniques for 5G networks and beyond (6G), in which the same node/hardware is used to provide both backhaul and cellular services in a multi-hop fashion. Due to the sensitivity…
The high propagation and penetration loss experienced at millimeter wave (mmWave) frequencies requires ultra-dense deployments of 5th generation (5G) base stations, which may be infeasible and costly for network operators. Integrated Access…
Millimeter-wave (mmWave) communication is a promising technology to cope with the expected exponential increase in data traffic in 5G networks. mmWave networks typically require a very dense deployment of mmWave base stations (mmBS). To…
Mobile backhaul system based on a wireless mesh network using point-to-point millimetre wave links is a promising solution for dense 5G small cell deployments. While mmW radio technology can provide the sufficient capacity, the management…
Technologies for mmWave communication are at the forefront of investigations in both industry and academia, as the mmWave band offers the promise of orders of magnitude additional available bandwidths to what has already been allocated to…
Maximizing data uploading efficiency in a vehicular-to-road data uploading system using millimeter-wave communication is a challenging issue, as the wireless zone is often critically narrow, and vehicles can easily fail to pass through it…
A limitation of bandwidth in the wireless network and the exponential rise in the high data rate requirement prompted the development of Massive Multiple-Input-Multiple-Output (MIMO) technique in 5G. Using this method the ever rising data…
Highly dynamic and mobile applications, such as vehicular networks, require stable connectivity, which is often challenging to achieve. Network densification is a key approach to address this issue and can be achieved cost-effectively…
To reach a cost-efficient 5G architecture, the use of remote radio heads connected through a fronthaul to baseband controllers is a promising solution. However, the fronthaul links must support high bit rates as 5G networks are projected to…
Terahertz frequency bands will likely be used for the next-generation wireless communication systems to provide data rates of hundreds of Gbps or even Tbps because of the wide swaths of unused and unexplored spectrum. This paper presents…
In the scenario where small cells are densely deployed, the millimeter wave (mmWave) wireless backhaul network has been widely used. However, mmWave is easily blocked by obstacles, and how to forward the data of the blocked flows is still a…