Related papers: Throughput and Robustness Guaranteed Beam Tracking…
Millimeter wave (mmWave) communications systems are promising candidate to support extremely high data rate services in future wireless networks. MmWave communications exhibit high penetration loss (blockage) and require directional…
5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization…
Millimeter-wave (mmWave) systems use directional beams to support high-rate data communications. Small misalignment between the transmit and receive beams (e.g., due to the mobility) can result in significant drop of the received signal…
There has been a growing interest in the commercialization of millimeter wave (mmW) technology as a part of the Fifth-Generation New Radio (5G-NR) wireless standardization efforts. In this direction, many sets of independent measurement…
Millimeter-wave (mmWave) frequency bands offer a new frontier for next-generation wireless networks, popularly known as 5G, to enable multi-gigabit communication; however, the availability and reliability of mmWave signals are significantly…
Millimeter wave (mmWave) communications can potentially meet the high data-rate requirements of unmanned aerial vehicle (UAV) networks. However, as the prerequisite of mmWave communications, the narrow directional beam tracking is very…
Recently, the millimeter wave (mmWave) band has been investigated as a means to support the foreseen extreme data rate demands of emerging automotive applications, which go beyond the capabilities of existing technologies for vehicular…
Analog beamforming is a low-cost architecture for millimeter-wave (mmWave) mobile communications. However, it has two disadvantages for serving fast mobility users: (i) the mmWave beam in the wireless channel and the beam steered by analog…
The millimeter wave (mmWave) band has the potential to provide high throughput among wearable devices. When mmWave wearable networks are used in crowded environments, such as on a bus or train, antenna directivity and orientation hold the…
Beam training and prediction in millimeter-wave communications are highly challenging due to fast time-varying channels and sensitivity to blockages and mobility. In this context, infrastructure-mounted cameras can capture rich…
Utilizing millimeter-wave (mmWave) frequencies for wireless communication in \emph{mobile} systems is challenging since it requires continuous tracking of the beam direction. Recently, beam tracking techniques based on channel sparsity…
The focus of this paper is on beamforming in a millimeter-wave (mmW) multi-input multi-output (MIMO) setup that has gained increasing traction in meeting the high data-rate requirements of next-generation wireless systems. For a given MIMO…
The surge in mobile broadband data demands is expected to surpass the available spectrum capacity below 6 GHz. This expectation has prompted the exploration of millimeter wave (mm-wave) frequency bands as a candidate technology for next…
The next generations of wireless networks will work in frequency bands ranging from sub-6 GHz up to 100 GHz. Radio signal propagation differs here in several critical aspects from the behaviour in the microwave frequencies currently used.…
Mobility management is a major challenge for the wide-spread deployment of millimeter-wave (mmWave) cellular networks. In particular, directional beamforming in mmWave devices renders high-speed mobility support very complex. This…
Millimeter wave (mmWave) communications are vulnerable to blockages and node mobility due to the highly directional signal beams. The emerging Reconfigurable Intelligent Surfaces (RISs) technique can effectively mitigate the blockage…
Terahertz (THz) communication will be a key enabler for next-generation wireless systems. While THz frequency bands provide abundant bandwidth and extremely high data rates, their effective operation is inhibited by short communication…
Industry 4.0 relies heavily on wireless technologies. Energy efficiency and device cost have played a significant role in the initial design of such wireless systems for industry automation. However, high reliability, high throughput, and…
Millimeter wave (mmWave) vehicular communica tion systems have the potential to improve traffic efficiency and safety. Lack of secure communication links, however, may lead to a formidable set of abuses and attacks. To secure communication…
The surge in mobile broadband data demands is expected to surpass the available spectrum capacity below $6$ GHz. This expectation has prompted the exploration of millimeter wave (mm-wave) frequency bands as a candidate technology for next…