Related papers: 1.064-um-band up-conversion single-photon detector
Superconducting Nanowire Single Photon Detector (SNSPD) emerges as a potential candidate in the multiple fields requiring sensitive and fast photodetection. While nanowires of low temperature superconducting detectors are mature with…
We demonstrate a photon-sensitive, three-dimensional camera by active near-infrared illumination and fast time-of-flight gating. It uses pico-second pump pulses to selectively up-convert the backscattered photons according to their…
We demonstrate background-free quantum frequency conversion of single photons from an epitaxially-grown InAs quantum dot. Single photons at \approx 980 nm are combined with a pump laser near 1550 nm inside a periodically-poled lithium…
For the SPECTRAP experiment at GSI, Germany, detectors with Single-Photon counting capability in the visible and near-infrared regime are required. For the wavelength region up to 1100 nm we investigate the performance of 2x2 mm^2 avalanche…
We report on multi-photon statistics of correlated twin beams produced in a periodic poled micro-ring resonator on thin-film lithium niobate. Owing to high cavity confinement and near perfect quasi-phase matching, the photons pairs are…
Superconducting-nanowire single-photon detectors (SNSPDs) have enabled the realization of several quantum optics technologies thanks to their high detection efficiency, low dark-counts, and fast recovery time. However, the widespread use of…
Single photon sensitivity is an important property of certain detection systems. This work investigated the single photon sensitivity of the Adaptive Gain Integrating Pixel Detector (AGIPD) and its dependence on possible detector noise…
Distinguishing photon-arrival time and position is crucial for advancing quantum technology. However, capturing spatial and temporal information efficiently remains challenging. Here, we present a novel photon-detection technique to achieve…
Photonic quantum computers are currently one of the primary candidates for fault-tolerant quantum computation. At the heart of the photonic quantum computation lies the strict requirement for suitable quantum sources e.g. high purity, high…
We measured the optical absorptance of superconducting nanowire single photon detectors. We found that 200-nm-pitch, 50%-fill-factor devices had an average absorptance of 21% for normally-incident front-illumination of 1.55-um-wavelength…
We experimentally demonstrate a high-fidelity visible-to-telecommunication wavelength conversion of a photon by using a solid-state-based difference frequency generation. In the experiment, one half of a pico-second visible entangled photon…
Superconducting Microstrip Single Photon Detectors (SMSPDs) are increasingly attracting the interest of the scientific community as a new platform for large area detectors with unprecedented advantaged in terms of fabrication. However,…
In a recent publication we have proposed a numerical model that describes the detection process of optical photons in superconducting nanowire single-photon detectors (SNSPD). Here, we review this model and present a significant improvement…
Niobium Nitride (NbN) nanowire is the most popular detection material of superconducting nanowire single photon detectors (SNSPDs) for high repetition rate and high efficiency. However, it has been assumed to be difficult for fabricating…
Frequency-degenerate photon pairs generated using nonlinear photonic integrated devices are a crucial resource for scalable quantum information processing and metrology. However, their realization is hindered by unwanted parametric…
We report 10-ps correlated photon pair generation in periodically-poled reverse-proton-exchange lithium niobate waveguides with integrated mode demultiplexer at a wavelength of 1.5-um and a clock of 10 GHz. Using superconducting single…
Bright single photon emission from single quantum dots in suspended circular Bragg grating microcavities is demonstrated. This geometry has been designed to achieve efficient (> 50 %) single photon extraction into a near-Gaussian shaped…
Dark count rate is one of the key parameters limiting the performance of the superconducting nanowire single photon detector (SNSPD). We have designed a multi-layer film bandpass filter that can be integrated onto the SNSPD to suppress the…
At the core of an ideal single photon detector is an active material that ideally absorbs and converts photons to discriminable electronic signals. A large active material volume favours high-efficiency absorption, but often at the expense…
The absorptance of p-polarized light in superconducting-nanowire single-photon detectors (SNSPDs) was improved by integrating (1) ~quarter-wavelength nano-optical cavity closed by a gold reflector (OC-SNSPD), (2) nano-cavity-array closed by…