Related papers: An improved design method for conventional straigh…
Permanent magnet has a small and compact structure, is especially suitable for a narrow space. With the aid of soft iron, the magnetic field can be increased much more and the field uniformity can be well controlled. Most Permanent magnets…
Here we present designs for a static septum magnet with two adjacent apertures where ideally one aperture has a uniform dipole field and the other zero field. Two designs are considered. One is a true septum magnet with a thin layer of…
We describe a framework to assemble permanent-magnet cubes in 3D-printed frames to construct dipole, quadrupole, and solenoid magnets, whose field, in the absence of iron, can be calculated analytically in three spatial dimensions. Rotating…
The common coil geometry provides an alternate design to the conventional cosine theta dipoles. It allows a wider range of conductor and magnet technologies. It also facilitates a low-cost, rapid-turn-around design and R&D program. Recent…
Topology optimization offers great opportunities to design permanent magnetic systems that have specific external field characteristics. Additive manufacturing of polymer bonded magnets with an end-user 3D printer can be used to manufacture…
In this paper, a new type magnet is proposed and processed to uniform the transverse beam profile. Compeared to the octupole, the new type magnet can prove a similar octupole magnet field in the middle, but the rise rate declines quickly in…
Homogeneous magnetic fields can be generated through the strategic arrangement of permanent magnets. The Halbach array serves as a prominent example of an effective design following this principle. However, it is a two-dimensional approach…
Infinitesimal electric and magnetic dipoles are widely used as an equivalent radiating source model. In this paper, an improved method for dipole extraction from magnitude-only electromagnetic-field data based on genetic algorithm and…
A common optimization problem in the areas of magnetized plasmas and fusion energy is the design of magnets to produce a given three-dimensional magnetic field distribution to high precision. When designing arrays of permanent magnets for…
We present a target field approach to analytically design magnetic fields using permanent magnets. We assume that their magnetisation is bound to a two-dimensional surface and is composed of a complete basis of surface modes. By posing the…
We describe the construction of a prototype hybrid permanent magnet dipole and quadruple. The magnet consists of two concentric rings of SmCo magnetic material 5 cm in length. The outer ring is made of 16 uniformly magnetized blocks…
We present a design and the optimization of an irregular-shaped ring-pair magnet array that generates a 1D monotonic field pattern for 2D head imaging in a low-field portable MRI system. The magnet rings are discretized into fan-shaped ring…
A general scheme for increasing the difference in magnetic flux density between a high and a low magnetic field region by removing unnecessary magnet material is presented. This is important in, e.g., magnetic refrigeration where magnet…
This paper proposes a novel method for resonant slow extraction in synchrotrons by using special anti-symmetric sextupole fields, which can be produced by a special magnet structure. The method has the potential in applications demanding…
Magnetically-sensitive experiments and newly-developed quantum technologies with integrated high-permeability magnetic shields require increasing control of their magnetic field environment and reductions in size, weight, power and cost.…
In this paper we discuss the main principles of magnetic design for superconducting magnets (dipoles and quadrupoles) for particle accelerators. We give approximated equations that govern the relation between the field/gradient, the current…
Several coil structures have been used in accelerator superconducting quadrupole magnets, and cos2{\theta} quadrupole magnets are the most mature in theoretical research and engineering applications. However, the cos2{\theta} quadrupole…
In this paper a novel compressor for static magnetic fields is proposed based on finite embedded transformation optics. When the DC magnetic field passes through the designed device, the magnetic field can be compressed inside the device.…
The magnetic design is a basic aspect of the superconducting magnets for particle accelerators. When dealing with single aperture cos-theta type dipoles, at the first order, the design can be performed with an analytic approach based on a…
Additive manufacturing of polymer bonded magnets is a recently developed technique, for single-unit production, and for structures that have been impossible to manufacture previously. Also new possibilities to create a specific stray field…