Related papers: HoLiSwap: Reducing Wire Energy in L1 Caches

The present work proposes a new approach to energy effiency for filtering of a system interconnected by a Multi-Hop network. The minimization of the energy cost per time unit is obtained through limiting the number of packets retransmission…

The use of white and black listing techniques in Wireless Sensor Networks (WSN), and in particular those which are based on the Time Slotted Channel Hopping (TSCH) operating mode of IEEE 802.15.4, permits to improve reliability and latency…

In this paper, a wireless cooperative network is considered, in which multiple source-destination pairs communicate with each other via an energy harvesting relay. The focus of this paper is on the relay's strategies to distribute the…

We present the multi-hop extensions of the recently proposed energy-efficient time synchronization scheme for wireless sensor networks, which is based on the asynchronous source clock frequency recovery and reversed two-way message…

Recently, energy encryption for wireless power transfer has been developed for energy safety, which is important in public places to suppress unauthorized energy extraction. Most techniques vary the frequency so that unauthorized receivers…

The effectiveness and simple implementation of physical layer jammers make them an essential threat for wireless networks. In a multihop wireless network, where jammers can interfere with the transmission of user messages at intermediate…

The emergence of low-power wide area networks (LPWANs) as a new agent in the Internet of Things (IoT) will result in the incorporation into the digital world of low-automated processes from a wide variety of sectors. The single-hop…

The ever-increasing number of distributed embedded systems in the context of the Internet of Things (IoT), Wireless Sensor Networks (WSN), and Cyber-Physical Systems (CPS) rely on wireless communication to collect and exchange data. Nodes…

Caches are widely used to improve performance in modern processors. By carefully evicting cache lines and identifying cache hit/miss time, contention-based cache timing channel attacks can be orchestrated to leak information from the victim…

Due to increasing cache sizes and large leakage consumption of SRAM device, conventional SRAM caches contribute significantly to the processor power consumption. Recently researchers have used non-volatile memory devices to design caches,…

In this work, we address the relay selection problem for the wireless powered communication networks, where the relays harvest energy from the source radio frequency signals. A single source-destination pair is considered without a direct…

Low-power wide area networks (LPWANs) have been identified as one of the top emerging wireless technologies due to their autonomy and wide range of applications. Yet, the limited energy resources of battery-powered sensor nodes is a top…

This paper investigates the outage probability and the throughput of relay networks with wireless information and energy transfer where the relays harvest energy from the transmitted radio-frequency signal of the source. Considering…

User cooperation is an effective technique to tackle the severe near-far user unfairness problem in wireless powered communication networks (WPCNs). In this paper, we consider a WPCN where two collaborating wireless devices (WDs) first…

The heterogeneity in pack voltages and capacity of aged packs limits the performance and economic viability of second-use battery energy storage systems (2-BESS) due to issues of reliability and available energy. Overcoming these…

Low-Power Wide Area Networks (LPWANs) have arisen as a promising communication technology for supporting Internet of Things (IoT) services due to their low power operation, wide coverage range, low cost and scalability. However, most LPWAN…

On-chip networks have been proposed as the interconnect fabric for future systems-on-chip and multi-processors on chip. Power is one of the main constraints of these systems and interconnect consumes a significant portion of the power…

Major chip manufacturers have all introduced multicore microprocessors. Multi-socket systems built from these processors are used for running various server applications. Depending on the application, remote cache-to-cache transfers can…

Last level caches (LLCs) occupy a large chip-area and there size is expected to grow further to offset the limitations of memory bandwidth and speed. Due to high leakage consumption of SRAM device, caches designed with SRAM consume large…

In this paper we analyze the trade-offs between energy and throughput for links in a wireless sensor network. Our application of interest is one in which a number of low-powered sensors need to wirelessly communicate their measurements to a…