Related papers: Contact resistance between two REBCO tapes under l…
Superconducting stacks and bulks can act as very strong magnets (more than 17 T), but they lose their magnetization in the presence of alternating (or ripple) transverse magnetic fields, due to the dynamic magneto-resistance. This…
REBCO tape has remarkable performance for super-conducting technology, but it is extremely expensive and it is a strongly anisotropic superconductor. The design of a 3.5 T collider dipole is presented in which all turns of the body winding…
Coupling losses were studied in composite tapes containing superconducting material in the form of two separate stacks of densely packed filaments embedded in a metallic matrix of Ag or Ag alloy. This kind of sample geometry is quite…
We have developed a system for contactless measurement of nonlinear conductivity in the radio-frequency band, and over a wide temperature range. A non-resonant circuit is used to electrically excite the sample, and the induced signal is…
The magnetization of ReBCO tape stacks and tape stack cables in high magnetic fields (up to 30 T) are not commonly reported. Here we report magnetization measurements of tape stack cables in magnetic fields up to 30 T at 4.2 K. We observed…
REBCO coated conductors (CCs) have the potential to widen considerably the application areas of superconductivity. Quench protection of REBCO-based devices represents one of the major obstacles to this expansion. Thermal conductivity data…
Besides screening-current-induced magnetic fields (SCIF), the shielding effect in high-Tc coated conductors also has an strong influence on its strain distribution in a coil winding, especially during high-field operations. To demonstrate…
CORC$^\circledR$ wires are a promising superconductor for accelerator magnet applications. While their excellent uniaxial tensile properties have been well established, potential degradation under transverse compression remains a…
High-pressure electrical resistivity, r(T), measurements on intermetallic Pr(Co, Ni, Pt)2B2C compounds were performed down to 2K. At room pressure the r(T) in a-b direction curves for the non superconducting Pr(Co, Ni)2B2C compounds exhibit…
We compute the contact resistances $R_{\rm c}$ in trigate and FinFET devices with widths and heights in the 4 to 24 nm range using a Non-Equilibrium Green's Functions approach. Electron-phonon, surface roughness and Coulomb scattering are…
We have investigated the contact resistance of rubrene single-crystal field-effect transistors (FETs) with Nickel electrodes by performing scaling experiments on devices with channel length ranging from 200 nm up to 300 $\mu$m. We find that…
We present a concept of the rapid-cycling 1.7 T ReBCO magnet for 1 to 10 kT/s ramping range as required for muon acceleration in a future muon collider presently under study. This approach is based on the 6 kA CORC-like cable constructed…
We study the ballistic transmission and the contact resistance ($R_c$) of a graphite-graphene contact in a top contact geometry from first principles. We find that the calculated $R_c$'s depend on the amount of graphene-graphite overlap,…
The slitting process used for fabrication of REBa2Cu3Ox (REBCO, RE=Rare earth) tapes of required width will greatly improve production efficiency and reduce production costs. However, edge cracks induced by the slitting process of wide…
High temperature REBCO superconducting tapes are very promising for high-field magnets. Under high magnetic fields there are high electro-mechanical forces, and thus concern for mechanical damage. Due to large screening currents and…
A hydrostatic pressure study was made on pure and Rh-doped specimens of the superconducting ferromagnetic compounds Ru1-xRhxSr2GdCu2O8 (x = 0-0.15) by means of measurement of electrical resistivity vs temperature, in pressures up to 2 GPa.…
Striating HTS coated conductor (CC) tapes into narrow filaments offers the possibility of reducing the tapes' magnetization losses without unreasonably decreasing their current-carrying capability. However, realizing well-separated…
This paper reports ballistic magnetoresistance values over 4000% measured in electrodeposited Ni-Ni nanocontacts with T geometry previously developed . Over the time, after several magnetic field cycles, the ballistic magnetoresistance…
Magnetometers based on the extraordinary magnetoresistance (EMR) effect are promising for applications which demand high sensitivity combined with room temperature operation but their application for magnetic field sensing requires further…
The conductor on round core (CORC) cable is one of the major high temperature superconductor cable concepts combining scalability, flexibility, mechanical strength, ease of fabrication and high current density; making it a possible…