Related papers: Non-Linear Programming: Maximize SNR for Designing…
In this paper, the feasibility of adopting an intelligent reflective surface (IRS) in a cell-free wireless communication system is studied. The received signal-to-noise ratio (SNR) for this IRS-enabled cell-free set-up is optimized by…
After reviewing models and mitigation strategies for interchannel nonlinear interference (NLI), we focus on the frequency-resolved logarithmic perturbation model to study the coherence properties of NLI. Based on this study, we devise an…
Spectrum sensing is essential in cognitive radio to enable dynamic spectrum access. In many scenarios, primary user signal must be detected reliably in low signal-to-noise ratio (SNR) regime under required sensing time. We propose to use…
Consider the minimum mean-square error (MMSE) of estimating an arbitrary random variable from its observation contaminated by Gaussian noise. The MMSE can be regarded as a function of the signal-to-noise ratio (SNR) as well as a functional…
Mixed noise, composed of white Gaussian noise (WGN) and impulsive noise (IN), appears in numerous communication scenarios and can severely degrade system performance. In this paper, we optimize the transmitted constellation under mixed…
The Wireless Network Design Problem (WND) consists in choosing values of radio-electrical parameters of transmitters of a wireless network, to maximize network coverage. We present a pure 0-1 Linear Programming formulation for the WND that…
We demonstrate mitigation of inter-channel nonlinear interference noise (NLIN) in WDM systems for several amplification schemes. Using a practical decision directed recursive least-squares algorithm, we take advantage of the temporal…
The performance of a CDMA based wireless system is largely dependent on the characteristics of pseudo-random spreading codes. The spreading codes should be carefully chosen to ensure highest possible peak value of auto-correlation function…
Noise power estimation is a key issue in modern wireless communication systems. It allows resource allocation by detecting white spectral spaces effectively, and gives control over the communication process by adjusting transmission power.…
Recently, a metric called energy dispersion index (EDI) was proposed to indicate the nonlinear interference (NLI) induced by correlated symbols during optical transmission. In this paper, we propose a new shaper architecture to decrease the…
Opportunistic scheduling and beamforming schemes are proposed for multiuser MIMO-SDMA downlink systems with linear combining in this work. Signals received from all antennas of each mobile terminal (MT) are linearly combined to improve the…
Totally asynchronous code-division multiple-access (CDMA) systems are addressed. In Part I, the fundamental limits of asynchronous CDMA systems are analyzed in terms of spectral efficiency and SINR at the output of the optimum linear…
This paper investigates the maximum coding rate at which data can be transmitted over a noncoherent, multiple-input, multiple-output (MIMO) Rayleigh block-fading channel using an error-correcting code of a given blocklength with a…
We consider a mesh network at the edge of a wireless network that connects users to the core network via multiple base stations. For this scenario, we present a novel tree-search-based algorithm that strives to identify effective…
Downlink beamforming is an essential technology for wireless cellular networks; however, the design of beamforming vectors that maximize the weighted sum rate (WSR) is an NP-hard problem and iterative algorithms are typically applied to…
Scanning Electron Microscopy (SEM) is critical in nanotechnology, materials science, and biological imaging due to its high spatial resolution and depth of focus. Signal-to-noise ratio (SNR) is an essential parameter in SEM because it…
Intelligent reflecting surfaces (IRSs) have recently attracted the attention of communication theorists as a means to control the wireless propagation channel. It has been shown that the signal-to-noise ratio (SNR) of a single-user…
Wideband spectrum sensing detects the unused spectrum holes for dynamic spectrum access (DSA). Too high sampling rate is the main problem. Compressive sensing (CS) can reconstruct sparse signal with much fewer randomized samples than…
Extremely large-scale multiple-input multiple-output (XL-MIMO) communications correspond to systems whose antenna size is so large that conventional assumptions, such as uniform plane wave (UPW) impingement, are no longer valid. This paper…
Wireless sensor networks (WSNs) have attracted considerable attention in recent years and motivate a host of new challenges for distributed signal processing. The problem of distributed or decentralized estimation has often been considered…