Related papers: Large-Area Superconducting Nanowire Single-Photon …
We present a linearly arrayed, 16-element, superconducting nanowire single-photon detector with 83.4$\%$ system detection efficiency at 1550 nm and a mean per-element dead-time of 9.6-ns, enabling counting at 1 giga-count per second with…
Statistical studies on the performance of different superconducting nanowire single-photon detectors (SNSPDs) on one chip suggested that random constrictions existed in the nanowire that were barely registered by scanning electron…
Silicon single-photon detectors (SPDs) are key devices for detecting single photons in the visible wavelength range. Photon detection efficiency (PDE) is one of the most important parameters of silicon SPDs, and increasing PDE is highly…
Niobium Nitride (NbN) nanowire is the most popular detection material of superconducting nanowire single photon detectors (SNSPDs) for high repetition rate and high efficiency. However, it has been assumed to be difficult for fabricating…
A backside-illuminated (BSI) near-infrared enhanced silicon single-photon avalanche diode (SPAD) for time-of-flight (ToF) light detection and ranging applications is presented. The detector contains a 2 $\mu$m wide multiplication region…
Superconducting nanowire single-photon detectors (SNSPDs) combine high detection efficiency, low noise, and excellent timing resolution, making them a leading platform for photon-counting applications. However, despite decades of materials…
Single-Photon Avalanche Diodes (SPAD) are affordable photodetectors, capable to collect extremely fast low-energy events, due to their single-photon sensibility. This makes them very suitable for time-of-flight-based range imaging systems,…
We demonstrate a low noise short wavelength infrared (SWIR) Sb based type II superlattice (T2SL) avalanche photodiodes (APD). The SWIR GaSb/(AlAsSb/GaSb) APD structure was designed based on impact ionization engineering and grown by…
The superconducting nanowire single-photon detector (SNSPD) is a quantum-limit superconducting optical detector based on the Cooper-pair breaking effect by a single photon, which exhibits a higher detection efficiency, lower dark count…
The concept of the radio-frequency superconducting nanowire single-photon detector (RF-SNSPD) allows frequency-division multiplexing (FDM) of the bias and readout lines of several SNSPDs. Using this method, a multi-pixel array can be…
Dark count rate is one of the key parameters limiting the performance of the superconducting nanowire single photon detector (SNSPD). We have designed a multi-layer film bandpass filter that can be integrated onto the SNSPD to suppress the…
A superconducting thin film with uniform properties is the key to realize nanowire superconducting single-photon detectors (SSPDs) with high performance and high yield. To investigate the uniformity of NbN films, we introduce and…
Practical superconducting nanowire single photon detectors (SNSPDs) demonstrate a strong trade-off between detection sensitivity and the reset time. Often, there are wide variations in sensitivity and response times from SNSPDs of the same…
One of the most common approaches for quenching single-photon avalanche diodes is to use a passive resistor in series with it. A drawback of this approach has been the limited recovery speed of the single-photon avalanche diodes. High…
Semiconducting carbon nanotubes under high electric field stress (~10 V/um) display a striking, exponential current increase due to avalanche generation of free electrons and holes. Unlike in other materials, the avalanche process in such…
We developed superconducting nanowire single-photon detectors with an optical cavity (OC-SNSPDs) for multichannel systems. For efficient coupling, the devices were installed in compact fiber-coupled packages after their substrate thickness…
III V semiconductor nanowire based photodetectors have significant potential for remote sensing and LiDAR applications, particularly due to their ability to operate at 1.55 {\mu}m. Achieving room temperature operation and near unity…
We estimate the depairing current of superconducting nanowire single photon detectors (SNSPDs) by studying the dependence of the nanowires kinetic inductance on their bias current. The kinetic inductance is determined by measuring the…
We present a 1024-element imaging array of superconducting nanowire single photon detectors (SNSPDs) using a 32x32 row-column multiplexing architecture. Large arrays are desirable for applications such as imaging, spectroscopy, or particle…
To facilitate high optical coupling efficiency and absorptance, the active area of a superconducting nano/microstrip single-photon detector (SNSPD/SMSPD) is often designed as a meander configuration with a high filling factor (e.g., >=0.5).…