Related papers: Enhanced Dynamical Stability with Harmonic Slip-st…
The Fermilab Booster - built more than 40 years ago - operates well above the design proton beam intensity of 4x10**12 ppp. Still, the Fermilab neutrino experiments call for even higher intensity of 5.5x10**12 ppp. A multitude of intensity…
One of the major challenges of employing a dual-frequency phase-shifting algorithm for phase retrieval is its sensitivity to noise. Yun et. al [H Yun, B Li, S Zhang. 2017] proposed a dual-frequency method based on the Fourier transform…
The repetition rate stabilization of an optical frequency comb based on diode-pumped solid-state laser technology is demonstrated using an intra-cavity electro-optic modulator. The large feedback bandwidth of such modulators allows…
Hybrid precoding has been recently proposed as a cost-effective transceiver solution for millimeter wave (mm-wave) systems. While the number of radio frequency (RF) chains has been effectively reduced in existing works, a large number of…
Many modern and future particle accelerators employ high gradient superconducting RF (SRF) to generate beams of high energy, high intensity and high brightness for research in high energy and nuclear physics, basic energy sciences, etc. In…
We propose a novel sensing approach for the beam alignment problem in millimeter wave systems using a single Radio Frequency (RF) chain. Conventionally, beam alignment using a single phased array involves comparing beamformer output power…
Inspired by a recent experiment [Phys. Rev. Letts. \textbf{122}, 253201(2019)] that an unprecedented quantum interference was observed in the way of Stimulated Raman adiabatic passage (STIRAP) due to the coexisting resonant- and…
Satellite communication systems (SCSs) used for tactical purposes require robust security and anti-jamming capabilities, making frequency hopping (FH) a powerful option. However, the current FH systems face challenges due to significant…
We describe a high-performance, compact optical frequency standard based on a microfabricated Rb vapor cell and a low-noise, external cavity diode laser operating on the Rb two-photon transition at 778 nm. The optical standard achieves an…
We present a hybrid laser frequency stabilization method combining modulation transfer spectroscopy (MTS) and frequency modulation spectroscopy (FMS) for the cesium D2 transition. In a typical pump-probe setup, the error signal is a…
The FLASH L-band (1.3 GHz) superconducting accelerator facility at DESY has a Low Level RF (LLRF) system that is similar to that envisioned for ILC. This system has extensive monitoring capability and was used to gather performance data…
KEK-ATF is doing R&D establishing high-current and low-emittance electron beam for the future linear colliders. In ATF, 15 ps length electron beam is generated by combination of a thermionic gun, a couple of 357 MHz SHBs, and a S-band TW…
The readout electronics for the resonant beam position monitors (BPMs) in the Fermilab Switchyard (SY) have been upgraded, utilizing a low noise amplifier transition board and Fermilab designed digitizer boards. The stripline BPMs are…
Least-squares frequency switching (LSFS) is a new method to reconstruct signal and gain function (known as bandpass or baseline) from spectral line observations using the frequency switching method. LSFS utilizes not only two but a set of…
Many precision laser applications require active frequency stabilization. However, such stabilization loops operate by pushing noise to frequencies outside their bandwidth, leading to large "servo bumps" that can have deleterious effects…
A series of laboratory experiments on energy conserving gravity currents in a lock-exchange facility are conducted for a range of Reynolds numbers, $Re= \frac{U_Fh}{\nu} =$ 485-12270. The velocity and density fields are captured…
Multimode hollow microcavities in three-dimensional (3D) photonic crystals (PhCs) are designed for achieving enhanced coherent anti-Stokes Raman scattering, which requires a cavity to have three high quality-factor (Q) modes with equally…
Ultrastable lasers form the back bone of precision measurements in science and technology. Such lasers attain their stability through frequency locking to reference cavities. State-of-the-art locking performances to date had been achieved…
With increased share of Static Frequency Converters (SFCs) in 16$\frac{2}{3}$ Hz railway grids concerns about stability have increased. Stability studies for such low-frequency railway grids are few, and models that describe SFC dynamics…
Light from a Tm,Ho:YLF laser operating at 2051 nm is frequency doubled then coupled into a high Fabry-Perot cavity with manufacturer quoted finesse in excess of 300,000. The frequency of the laser is stabilized using the Pound-Drever-Hall…