Related papers: The MIRI Medium Resolution Spectrometer calibratio…
One of many ways for the James-Webb Space Telescope (JWST) to capture astronomical signals is the Mid-Infrared Instrument (MIRI) Imaging mode. To make this data ready for analysis, the JWST standard reduction pipeline has three stages and…
Context: The NIRSpec instrument for the James Webb Space Telescope (JWST) can be operated in multiobject (MOS), long-slit, and integral field (IFU) mode with spectral resolutions from 100 to 2700. Its MOS mode uses about a quarter of a…
MIRI is the imager and spectrograph covering wavelengths from $4.9$ to $27.9$ $\mu$m onboard the James Webb Space Telescope (JWST). The Medium-Resolution Spectrometer (MRS) consists of four integral field units (IFU), each of which has…
The NIRSpec instrument for the James Webb Space Telescope (JWST) is a highly versatile near-infrared spectrograph that can be operated in various observing modes, slit apertures, and spectral resolutions. Obtaining dedicated calibration…
The James Webb Space Telescope will provide deep imaging and spectroscopy for sources at redshifts above 6, covering the Epoch of Reionization (EoR, 6 < z < 10). The Mid-IR instrument (MIRI) integral field spectrograph (MRS) will be the…
The Near-Infrared Spectrograph (NIRSpec) is one of four instruments aboard the James Webb Space Telescope (JWST). NIRSpec is developed by ESA with AIRBUS Defence & Space as prime contractor. The calibration of its various observing modes is…
The detectors of the JWST Mid-Infrared Instrument (MIRI) Medium Resolution Spectrometer (MRS) form low-finesse resonating cavities that cause periodic count rate modulations (fringes) with peak amplitudes of up to 15% for sources external…
This manuscript reports a part of a dedicated study aiming to disentangle sources of signals from James Webb Space Telescope (JWST) Mid-Infrared Instrument (MIRI) imaging mode. An instrumental introduction and characteristics section is…
The constructive and destructive interference in different layers of the James Webb Space Telescope (JWST) Mid-Infrared Instrument (MIRI) detector arrays modulate the detected signal as a function of wavelength. Additionally, sources of…
The Mid-Infrared Instrument MIRI on-board the James Webb Space Telescope uses three Si:As impurity band conduction detector arrays. MIRI medium resolution spectroscopic measurements (R$\sim$3500-1500) in the 5~$\mu m$ to 28~$\mu m$…
We describe an algorithm for application of the classic `drizzle' technique to produce 3d spectral cubes using data obtained from the slicer-type integral field unit (IFU) spectrometers on board the James Webb Space Telescope. This…
We present the absolute flux and wavelength calibration of the James Webb Space Telescope (JWST) Near-Infrared Camera (NIRCam) Wide Field Slitless Spectroscopy (WFSS) mode. Each of NIRCam's two modules (A and B) provides independent long…
The InfraRed Imaging Spectrograph (IRIS) is a first-light instrument for the Thirty Meter Telescope (TMT). It combines a diffraction limited imager and an integral field spectrograph. This paper focuses on the electrical system of IRIS.…
The Infra-Red Imaging Spectrograph (IRIS) is one of the three first light instruments for the Thirty Meter Telescope (TMT) and is the only one to directly sample the diffraction limit. The instrument consists of a parallel imager and…
The Near-Infrared Spectrograph (NIRSpec) on the James Webb Space Telescope (JWST) offers the first opportunity to use integral-field spectroscopy from space at near-infrared wavelengths. More specifically, NIRSpec's integral-field unit can…
The Near-Infrared Imager and Slitless Spectrograph (NIRISS) is the science module of the Canadian-built Fine Guidance Sensor (FGS) onboard the James Webb Space Telescope (JWST). NIRISS has four observing modes: 1) broadband imaging…
The MIRI Si:As IBC detector arrays extend the heritage technology from the Spitzer IRAC arrays to a 1024 x 1024 pixel format. We provide a short discussion of the principles of operation, design, and performance of the individual MIRI…
We provide an overview of the design and capabilities of the near-infrared spectrograph (NIRSpec) onboard the James Webb Space Telescope. NIRSpec is designed to be capable of carrying out low-resolution ($R\!=30\!-330$) prism spectroscopy…
The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with four coronagraphs that provide high contrast imaging capabilities for studying faint point sources and extended emission that would otherwise be overwhelmed by a…
IRIS (InfraRed Imaging Spectrograph) is a first light near-infrared diffraction limited imager and integral field spectrograph being designed for the future Thirty Meter Telescope (TMT). IRIS is optimized to perform astronomical studies…