Related papers: Multi-terminal multi-junction dc SQUID for nanosca…
Precise gravitational measurements are vital for geophysics and inertial navigation, but compact gravimeters with high measurement bandwidth remain difficult to realize. We propose and analyze a chip-scale superconducting gravimeter in…
We present a method for fabricating Josephson junctions and superconducting quantum interference devices (SQUIDs) which is based on the local anodization of niobium strip lines 3 to 6.5 nm-thick under the voltage-biased tip of an Atomic…
Non-reciprocal charge transport in supercurrent diodes (SDs) polarized growing interest in the last few years for its potential applications in superconducting electronics (SCE). So far, SD effects have been reported in complex hybrid…
We report on the development of highly sensitive SQUIDs featuring sub-micrometer loop dimensions. The integration of high quality and low capacitance SIS Nb/AlOx/Nb cross-type Josephson tunnel junctions results in white flux noise levels as…
Time-division SQUID multiplexers are used in many applications that require exquisite control of systematic error. One potential source of systematic error is the pickup of external magnetic fields in the multiplexer. We present…
We report a new computational model for simulations of electromagnetic interactions with semiconductor quantum well(s) (SQW) in complex electromagnetic geometries using the finite difference time domain (FDTD) method. The presented model is…
We experimentally investigate the stochastic phase dynamics of planar Josephson junctions (JJs) and superconducting quantum interference devices (SQUIDs) defined in epitaxial InAs/Al heterostructures, and characterized by a large ratio of…
We report on the development of nearly quantum limited SQUIDs with miniature pickup loop dimensions. The implemented high quality and low capacitance cross-type Nb/AlOx/Nb Josephson junctions offer large $I_CR_N$-products and therefore…
The recent demonstration of the superconducting diode effect (SDE) has generated renewed interests in superconducting electronics in which devices such as compact superconducting diodes that can perform signal rectification where low-energy…
We report on the development of a new family of SQUID current sensors based on sub-micron cross-type Josephson tunnel junctions. Their low total junction capacitance permit high usable voltage swings of more than 100 {\mu}V and exceptional…
We study theoretically the efficiency of an asymmetric superconducting quantum interference device (SQUID) which is constructed as a loop with three capacitively and resistively shunted Josephson junctions. Two junctions are placed in…
We propose and experimentally demonstrate detecting small single-cycle and few-cycle signals by using the symmetric double-well potential of a radio frequency superconducting quantum interference device (rf-SQUID). We show that the response…
Sensitive magnetometers that can operate in high magnetic fields are essential for detecting magnetic resonance signals originating from small ensembles of quantum spins. Such devices have potential applications in quantum technologies, in…
An interferometric device is proposed in order to analyze the quartet mode in biased three-terminal Josephson junctions (TTJs), and to provide experimental evidence for emergence of a single stationary phase, the so-called quartet phase. In…
There is growing interest in exploring nanomagnetic devices as potential replacements for electronic devices (e.g. transistors) in digital switching circuits and systems. A special class of nanomagnetic devices are switched with…
We report noise measurements performed on a SQUID magnetometer implementing Grooved Dayem nanobridge of YBCO as weak-links. The SQUID shows magnetic flux noise as low as 10 $\mu \Phi_0$/Hz$^{0.5}$. The magnetometer is realized by coupling…
Superconducting granular aluminum is attracting increasing interest due to its high kinetic inductance and low dissipation, favoring its use in kinetic inductance particle detectors, superconducting resonators or quantum bits. We perform…
Typical measurements of nanowire devices rely on end-to-end measurements to reveal mesoscopic phenomena such as quantized conductance or Coulomb blockade. However, creating nanoscale tunnel junctions allows one to directly measure other…
Four-terminal resistance measurements have been carried out on Zn nanowires formed using electron-beam lithography. When driven resistive by current, these wires re-enter the superconducting state upon application of small magnetic fields.…
InSb nanoflags represent an interesting platform for quantum transport and have recently been exploited in the study of hybrid planar Josephson junctions. Due to the uncovered semiconductor surface, they are also good candidates for surface…