Related papers: A Low-Complexity Transceiver Design in Sparse Mult…

Communication at millimeter wave frequencies will be one of the essential new technologies in 5G. Acquiring an accurate channel estimate is the key to facilitate advanced millimeter wave hybrid multiple-input multiple-output (MIMO)…

Integrating sensing into standardized communication systems can potentially benefit many consumer applications that require both radio frequency functions. However, without an effective sensing method, such integration may not achieve the…

Hybrid digital/analog architecture and low-resolution analog-to-digital/digital-to-analog converters (ADCs /DACs) are two low-cost implementations for large-scale millimeter wave (mmWave) systems. In this paper, we investigate the problem…

In this study, a novel transmission scheme is proposed to serve radar-sensing and communication objectives at the same time and allocated bandwidth. The proposed transmitted frame non-orthogonally superimposes two different waveforms, which…

In this paper, the problem of joint design of Spectrum Sensing (SS) and receive beamforming (BF), with reference to a Cognitive Radio (CR) system, is considered. The aim of the proposed design is the maximization of the achievable average…

Intelligent metasurfaces may be harnessed for realizing efficient holographic multiple-input and multiple-output (MIMO) systems, at a low hardware-cost and high energy-efficiency. As part of this family, we propose a hybrid beamforming…

In this paper, we studied the problem of beam alignment for millimeter wave (mmWave) communications, in which we assume a hybrid analog and digital beamforming structure is employed at the transmitter (i.e. base station), and an…

In recent years there has been growing interest in study of multi-antenna transmit designs for providing secure communication over the physical layer. This paper considers the scenario of an intended multi-input single-output channel…

{Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. We consider a MIMO multi-hop system, where the source, the relay, and the destination are equipped with multiple…

Beamforming has significance for enhancing spectral efficiency and mitigating interference in multi-antenna wireless systems, facilitating spatial multiplexing and diversity in dense and high mobility scenarios. Traditional beamforming…

This paper focuses on the joint design of transmit waveforms and receive filters for airborne multiple-input-multiple-output (MIMO) radar systems in spectrally crowded environments. The purpose is to maximize the output…

This paper proposes block-level precoder (BLP) designs for a multi-input single-output (MISO) system that performs joint sensing and communication across multiple cells and users. The Cramer-Rao-Bound for estimating a target's azimuth angle…

In this paper, multi-stream transmission in interference networks aided by multiple amplify-and-forward (AF) relays in the presence of direct links is considered. The objective is to minimize the sum power of transmitters and relays by…

This paper considers a simple on-off random multiple access channel, where n users communicate simultaneously to a single receiver over m degrees of freedom. Each user transmits with probability lambda, where typically lambda n < m << n,…

Rate-Splitting Multiple Access (RSMA) has emerged as a novel multiple access technique that enlarges the achievable rate region of Multiple-Input Multiple-Output (MIMO) broadcast channels with linear precoding. In this work, we jointly…

Modern mobile terminals often produce a large number of small data packets. For these packets, it is inefficient to follow the conventional medium access control protocols because of poor utilization of service resources. We propose a novel…

Integrated sensing and communication (ISAC) is a key enabling technique for future wireless networks owing to its efficient hardware and spectrum utilization. In this paper, we focus on dual-functional waveform design for a multi-input…

This paper considers the problem of estimating the channel response (or Green's function) between multiple source-receiver pairs. Typically, the channel responses are estimated one-at-a-time: a single source sends out a known probe signal,…

In this paper, we investigate the multiple-input multiple-output (MIMO) transceiver design under an interesting power model named mixed power constraints. In the considered power model, several antenna subsets are constrained by sum power…

Consider a multiuser multiple-input multiple-output (MU-MIMO) downlink system in which the base station (BS) sends multiple data streams to multi-antenna users via symbol-level precoding (SLP), where the optimization of receive combining…