Related papers: Formation of plano-convex micro-lens array in fuse…
We describe a micro-fabrication method to create concave features with ultra-low surface roughness in silica, either on the end facets of optical fibers or on flat substrates. The machining uses a single focused CO2 laser pulse. Parameters…
Future far-infrared astrophysics observatories will require focal plane arrays containing thousands of ultra-sensitive, superconducting detectors, each of which needs to be optically coupled to the telescope. At longer wavelengths, many…
We report on the fabrication of micro-axicons made of glass by laser-assisted wet etching (LAE) and laser polishing. The employed technique, relying on an efficient direct-writing process by femtosecond laser, allows revealing high fidelity…
Short (40-200 microseconds) single focused CO2 laser pulses of energy of about 100 microJ were used to fabricate high quality concave micromirror templates on silica and fluoride glass. The ablated features have diameters of 20-100 microns…
We describe a novel method for making microbottle-shaped lasers by using a CO$_2$ laser to melt Er:Yb glass onto silica microcapillaries or fibres. This is realised by the fact that the two glasses have different melting points. The CO$_2$…
Micro lens array is crucial in various kinds of optical and electronic applications. A micro lens array with high numerical aperture (NA) and low aberration is in particular needed. This research is aimed to design and fabricate such a…
Glass materials play an increasingly important role in advanced technologies due to their superior physical properties. However, precise machining of glass remains a major challenge because of its brittleness and sensitivity to thermal and…
We demonstrate a hybrid laser microfabrication approach, which combines the technical merits of ultrafast laser-assisted chemical etching and carbon dioxide laser-induced in-situ melting, for centimeter-scale and bonding-free fabrication of…
We describe a technique for surface and sub-surface micro-machining of glass substrates using tightly focused femtosecond laser pulses at a wavelength of 1660 nm. Although silicate glass is normally transparent at this wavelength, the…
Sub-100 nm polymeric spherical plano-convex nano-lens arrays are fabricated using short electron beam exposures to selectively modify the ultrathin (< 30 nm) polymer films, followed by their intensified self-organized dewetting under an…
We describe our work towards the manufacture of micro-optical arrays using freeform diamond machining techniques. Simulations have been done to show the feasibility of manufacturing micro-lens arrays using the slow-tool servo method. Using…
This paper presents a simple and effective method to fabricate a polydimethyl-siloxane (PDMS) microlens array with a high fill factor, which utilizes the UV proximity printing and photoresist replication methods. The concave microlens array…
We present the fabrication of exceptionally small-radius concave microoptics on fused silica substrates using CO2 laser ablation and subsequent reactive ion etching. The protocol yields on-axis near-Gaussian depressions with radius of…
This letter is the first demonstration of material modification using tightly focused femtosecond laser vortex beams. Double-charge femtosecond vortices were synthesized with the polarization-singularity beam converter described in Ref [1]…
A liquid crystal (LC) lens array based on double-layer composite electrodes, characterized by a large aperture, short focal length, and low operating voltage is demonstrated. The lens array consists of an LC layer, a top common electrode, a…
We demonstrate a laser-driven, tunable electron lens fabricated in monolithic silicon. The lens consists of an array of silicon pillars pumped symmetrically by two 300 fs, 1.95 $\mu$m wavelength, nJ-class laser pulses from an optical…
A simple and effective method to fabricate a high fill-factor triangular microlens array using the proximity printing in lithography process is reported. The technology utilizes the UV proximity printing by controlling a printing gap…
Glass is increasingly desired as a material for manufacturing complex microscopic geometries, from the micro-optics in compact consumer products to microfluidic systems for chemical synthesis and biological analyses. As the size, geometric,…
This letter is the first demonstration of material modification using tightly focused femtosecond laser vortex beams. Double-charge femtosecond vortices were synthesized with the polarization-singularity beam converter described in Ref [1]…
We demonstrate a compact fibre-based laser system at 2.05 microns stabilized to a CO2 transition using frequency modulation spectroscopy of a gas-filled hollow-core fibre. The laser exhibits an absolute frequency accuracy of 5 MHz, a…