Related papers: Quantifying Model Form Uncertainty in RANS Simulat…
Despite the increasing availability of high-performance computational resources, Reynolds-Averaged Navier-Stokes (RANS) simulations remain the workhorse for the analysis of turbulent flows in real-world applications. Linear eddy viscosity…
We present results of implicit large eddy simulation (LES) and different Reynolds-averaged Navier-Stokes (RANS) models of the MTU 161 low pressure turbine at an exit Reynolds number of 90,000 and exit Mach number of 0.6. The LES results are…
Solving the Reynolds-averaged Navier-Stokes equations (RANS) closed with an eddy viscosity computed through a turbulence model is still the leading approach for Computational Fluid Dynamics simulations. Unfortunately, universal models with…
In the present paper, an aerodynamic investigation of a high-speed train is performed. In the first section of this article, a generic high-speed train against a turbulent flow is simulated, numerically. The Reynolds-Averaged Navier-Stokes…
Linear modal instabilities of flow over finite-span untapered wings have been investigated numerically at Reynolds number 400, at a range of angles of attack and sweep on two wings having aspect ratios 4 and 8. Base flows have been…
To fully evaluate a turbulent flow, Direct Numerical Simulation (DNS) is the most accurate method by far and requires considerable computational power and time; not optimum for industry standards. Developing an alternative model, providing…
The objective of this work is to assess the impact of parameter uncertainty on hypersonic aerothermal surface heating predictions in Reynolds-Averaged Navier-Stokes (RANS) simulations using non-intrusive uncertainty quantification (UQ)…
This paper presents a Weakly Compressible Smoothed Particle Hydrodynamics (WCSPH) method for solving the two-equation Reynolds-Averaged Navier-Stokes (RANS) model. The turbulent wall-bounded flow with or without mild flow separation, a…
This paper applies Bayesian-optimization-RANS (turbo-RANS) to improve Reynolds-averaged Navier-Stokes (RANS) turbulence models for a converging-diverging channel, a case with adverse pressure gradients and flow separation. Using Bayesian…
Reynolds-averaged Navier-Stokes (RANS) turbulence models (such as k-\epsilon models) are still widely used for engineering applications because of their relatively simplicity and robustness. In fully developed plane channel flow (i.e. the…
Computational fluid dynamics (CFD) is a useful tool for prediction of turbulence in aerodynamic and biomedical applications. The choice of appropriate turbulence models is key to reaching accurate predictions. The present investigation…
It has previously been shown that by increasing the Reynolds number across a channel by spatially varying the viscosity does not cause an immediate change in the size of turbulent structures and a delay is in fact observed in both wall…
In typical nature and engineering scenarios, such as supernova explosion and inertial confinement fusion, mixing flows induced by hydrodynamics interfacial instabilities are essentially compressible. Despite their significance, accurate…
The purpose of this work is to investigate the flow around a fixed NACA0012 airfoil profile at different angles of attack using wall-resolved LES. The profile has a chord length of c=0.1 m and is exposed to a flow at a Reynolds number of…
Reynolds Averaged Navier Stokes (RANS) models represent the workhorse for studying turbulent flows in industrial applications. Such single-point turbulence models have limitations in accounting for the influence of the non-local physics and…
Modeled Reynolds stress is a major source of model-form uncertainties in Reynolds-averaged Navier-Stokes (RANS) simulations. Recently, a physics-informed machine-learning (PIML) approach has been proposed for reconstructing the…
A new model for the "rapid" part of the velocity/pressure-gradient correlation in the Reynolds averaged Navier-Stokes equations is suggested. It is shown that in an inhomogeneous incompressible turbulent flow, the model that is linear in…
Cavitation is a complex multiphase phenomenon characterised by vapour bubbles forming due to a sudden pressure drop and is often accompanied by increased hull vibrations, increased radiated noise and decrease in propeller and impeller…
We assess the suitability of Reynolds-Averaged Navier-Stokes (RANS) simulation using the Spallart-Almaras (SA) turbulence model as a closure in analysing the performance of fluidic Active Flow Control (AFC) applications. In particular, we…
In operational weather models, the effects of turbulence in the atmospheric boundary layer (ABL) on the resolved flow are modeled using turbulence parameterizations. These parameterizations typically use a predetermined set of model…