Related papers: High efficiency near diffraction-limited mid-infra…
A metasurface lens (meta-lens) bends light using nanostructures on a flat surface. Macroscopic meta-lenses (mm- to cm-scale diameter) have been quite difficult to simulate and optimize, due to the large area, the lack of periodicity, and…
Light emitted from single-mode semiconductor lasers generally has large divergence angles, and high numerical aperture lenses are required for beam collimation. Visible and near infrared lasers are collimated using aspheric glass or plastic…
We experimentally demonstrate ultrathin flat lenses with a thickness of 7 {\AA}, which corresponds to the fundamental physical limit of the thickness of the material, is fabricated in a large area, monolayer, CVD-prepared tungsten…
Recently, an achromatic metasurface was successfully demonstrated to deflect light of multiple wavelengths in the same direction and it was further applied to the design of planar lenses without chromatic aberrations [Science, 347,…
The miniaturization of current image sensors is largely limited by the volume of the optical elements. Using a sub-wavelength patterned quasi-periodic structure, also known as a metasurface, one can build planar optical elements based on…
We design, fabricate, and characterize multifunctional and compact diffractive microlenses with sub-wavelength thickness and the capability to simultaneously focus visible and near-infrared spectral bands at two different focal positions…
In the recent years, metasurfaces, being flat and lightweight, have been designed to replace bulky optical components with various functions. We demonstrate a monolithic Micro-Electro-Mechanical System (MEMS) integrated with a…
Ultrathin metasurfaces have recently emerged as promising materials to enable novel, flat optical components and surface-confined, miniature photonic devices. However, experimental realization of high-performance metasurfaces at visible…
Sub-wavelength resolution imaging requires high numerical aperture (NA) lenses, which are bulky and expensive. Metasurfaces allow the miniaturization of conventional refractive optics into planar structures. We show that high-aspect-ratio…
In this paper, we show by experiment that by covering a thin flat nonlinear lens on the sources, the sub-diffraction-limit observation can be achieved by measuring either the near-field distribution or the far-field radiation of the sources…
Metasurfaces composed of subwavelength unit cells usually require a large number of unit cells which leads to complicated design and optimization. Aggressive discretization in a metasurface can significantly reduce the number of unit cells…
Similar to their optic counterparts, acoustic components are anticipated to flexibly tailor the propagation of sound. However, the practical applications, e.g. for audible sound with large wavelengths, are frequently hampered by the issue…
Metasurfaces provide a compact, flexible, and reliable solution for controlling the wavefront of light. In imaging systems, micro-lens arrays are integrated with pixel matrices to reduce optical crosstalk, enhance photon collection…
Metasurfaces -- planar arrays of subwavelength nanostructures -- are typically realized with high-index dielectrics, while low-index platforms are often dismissed for their weaker contrast. Here, we identify and experimentally verify…
Sub-wavelength diffractive optics, commonly known as metasurfaces, have recently garnered significant attention for their ability to create ultra-thin flat lenses with extremely short focal lengths. Several materials with different…
High-quality flat optical elements require efficient light deflection to large angles and over a wide wavelength spectrum. Although phase gradient metasurfaces achieve this by continuously adding phase shifts in the range of 0 to 2{\pi} to…
In this Letter we present a Fresnel lens fabricated on the end of an optical fiber. The lens is fabricated using nanoimprint lithography of a functional high refractive index material, which is suitable for mass production. The main…
The numerical aperture (NA) of a lens determines its ability to focus light and its resolving capability. Having a large NA is a very desirable quality for applications requiring small light-matter interaction volumes or large angular…
Optical metasurfaces, comprised of subwavelength nanostructures, hold a great promise to high-power laser optics but also a limited pertinence due to their currently limited aperture size, throughput and durability. Here, an alternative…
Reflecting light to a pre-determined non-specular direction is an important ability of metasurfaces, which is the basis for a wide range of applications (e.g., beam steering/splitting and imaging). However, anomalous reflection with 100%…