Related papers: Performance and Degradation of A Lithium-Bromine R…
Lithium-metal batteries employing concentrated glyme-based electrolytes and different cathode chemistries are herein evaluated in view of a safe use of the highly energetic alkali-metal anode. Indeed, diethylene-glycol dimethyl-ether…
A full lithium-ion-sulfur cell with a remarkable cycle life was achieved by combining an environmentally sustainable biomass-derived sulfur-carbon cathode and a pre-lithiated silicon oxide anode. X-ray diffraction, Raman spectroscopy,…
In recent years, impressive advances in harvesting renewable energy have led to pressing demand for the complimentary energy storage technology. Here, a high coulombic efficiency (~ 99.7%) Al battery is developed using earth-abundant…
We report the performance of a hydrogen-chlorine electrochemical cell with a chlorine electrode employing a low precious metal content alloy oxide electrocatalyst for the chlorine electrode: (Ru_0.09Co_0.91)_3O_4. The cell employs a…
An important objective of designing lithium-ion rechargeable battery cells is to maximize their rate performance without compromising the energy density, which is mainly achieved through computationally expensive numerical simulations at…
Lithium fluorinated carbon is one of the most promising chemistries for high-energy-density primary energy storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density under ambient…
The rechargeable aprotic Li-air (O2) battery is a promising potential technology for next generation energy storage, but its practical realization still faces many challenges. In contrast to the standard Li-O2 cells, which cycle via the…
In order for the widely discussed benefits of flow batteries for electrochemical energy storage to be applied at large scale, the cost of the electrochemical stack must come down substantially. One promising avenue for reducing stack cost…
Li-ion rechargeable batteries have enabled the wireless revolution transforming global communication. Future challenges, however, demands distributed energy supply at a level that is not feasible with the current energy-storage technology.…
Using a new class of (BH4)- substituted argyrodite Li6PS5Z0.83(BH4)0.17, (Z = Cl, I) solid electrolyte, Li-metal solid-state batteries operating at room temperature have been developed. The cells were made by combining the modified…
Liquid metal batteries (LMBs) are a promising grid-scale storage device however, the scalability of this technology and its electrochemical performance is limited by mass transport overpotentials. In this work, a numerical model of a…
Rechargeable lithium metal batteries (LMBs) with an ultrahigh theoretical energy density have attracted more and more attentions for their crucial applications of portable electronic devices, electric vehicles, and smart grids. However, the…
Silicon is a promising anode material for next-generation lithium-ion batteries due to its exceptionally high specific capacity (3600 mAh g$^{-1}$), significantly exceeding that of conventional graphite. However, its practical application…
Despite recent significant developments of Si composites, use of silicon with significance in the anodes for Li-ion batteries is still limited. In fact, nominal energy density is to be saturated around ~750 Wh/L regardless of cell-types…
Heterogeneities in lithium ion batteries can be significant factors in electrode under utilisation and degradation while charging. Bilayer electrodes have been proposed as a convenient and scalable way to homogenise the electrode response.…
Li-CO$_2$ batteries are promising energy storage systems due to their high theoretical energy density and CO$_2$ fixation capability, relying on reversible Li$_2$CO$_3$/C formation during discharge/charge cycles. We present a multiscale…
High degree of fluorination for ether electrolytes has resulted in improved cycling stability of lithium metal batteries (LMBs) due to stable SEI formation and good oxidative stability. However, the sluggish ion transport and environmental…
An extremely efficient ethanol fuel cell electrode is produced by combining the large surface area of vertically oriented and highly conductive few-layer graphene sheets with electrochemically deposited palladium nanoparticles. The…
Several effective methods have been developed recently to demonstrate simultaneous high energy and high power density in Li - carbon fluoride (CF$_x$) batteries. These methods can achieve as high as 1000 Wh/kg energy density at 60-70 kW/kg…
Lithium metal batteries (LMBs), when coupled with a localized high-concentration electrolyte and a high-voltage nickel-rich cathode, offer a solution to the increasing demand for high energy density and long cycle life. However, the…