Related papers: Leidenfrost drops on a heated liquid pool
Within the coexistence region between liquid and vapor the equilibrium pressure of a simulated fluid exhibits characteristic jumps and plateaus when plotted as a function of density at constant temperature. These features exclusively…
In this article, we experimentally investigate the impact of a submillimetric water jet on a horizontal surface heated well above the "static" Leidenfrost temperature of water. We observe the transition from a regime where a single drop…
Drops deposited on an evaporating liquid bath can be maintained in an inverse Leidenfrost state by the vapor emanating from the bath, making them levitate and hover almost without friction. These perfectly non-wetting droplets create a…
When a liquid drop falls on a solid substrate, the air layer in between them delays the occurrence of liquid--solid contact. For impacts on smooth substrates, the air film can even prevent wetting, allowing the drop to bounce off with…
We experimentally investigate the self-sustained, star-shaped oscillations of Leidenfrost drops. The drops levitate on a cushion of evaporated vapor over a heated, curved surface. We observe modes with $n = 2-13$ lobes around the drop…
We investigated the impact of a droplet on a heated surface in a depressurized environment, with a particular focus on the unique outcome observed under these conditions: magic carpet breakup. This phenomenon, first reported by Hatakenaka…
Splashing occurs when a liquid drop hits a dry solid surface at high velocity. This paper reports experimental studies of how the splash depends on the roughness and the texture of the surfaces as well as the viscosity of the liquid. For…
We study experimentally the enhancement of splashing due to solidification. Investigating the impact of water drops on dry smooth surfaces, we show that the transition velocity to splash can be drastically reduced by cooling the surface…
In most spray coating and deposition applications, the target surface may be initially dry but with continuous drop impact a thin layer of liquid film is formed on which further impingement occurs. An experimental study of the process of…
The Leidenfrost transition leads a boiling system to the boiling crisis, a state in which the liquid loses contact with the heated surface due to excessive vapor generation. Here, using experiments of liquid droplets boiling on a heated…
We observed the zig-zag motion of small Leidenfrost water droplets (radii less than 0.6 mm) on a hot, flat substrate. To understand this motion, we conducted an experiment using a glass capillary to fix a droplet at its edge and control the…
A floating Leidenfrost droplet exhibits curvature inversion of its underside, due to the balance of vapor pressure and surface tension. Using interferometric imaging, we find different behavior for a levitated hydrogel sphere. Curvature…
Recent experiments found that a hot solid sphere that is able to sustain a stable Leidenfrost vapour layer in a liquid exhibits significant drag reduction during free fall. The variation of the drag coefficient with Reynolds number shows…
The impact of liquid drops on a heated solid surface is of great importance in many engineering applications. This paper describes the simulation of the drop-wall interaction using the smoothed particle hydrodynamics (SPH) method. The SPH…
When micrometric drops coalesce in-plane on a superhydrophobic surface, a surprising out-of-plane jumping motion was observed. Such jumping motion triggered by drop coalescence was reproduced on a Leidenfrost surface. High-speed imaging…
Hot liquid metal drops impacting onto a cold substrate solidify during their subsequent spreading. Here we experimentally study the influence of solidification on the outcome of an impact event. Liquid tin drops are impacted onto sapphire…
Liquid drops can be kept from touching a plane solid surface by a gas stream entering from underneath, as it is observed for water drops on a heated plate, kept aloft by a stream of water vapor. We investigate the limit of small flow rates,…
Effects of substrate temperature, substrate wettability and particles concentration are experimentally investigated for evaporation of a sessile water droplet containing colloidal particles. Time-varying droplet shapes and temperature of…
Escaping of the liquid molecules from their liquid bulk into the vapour phase at the vapour-liquid interface is controlled by the vapour diffusion process, which nevertheless hardly senses the macroscopic shape of this interface. Here,…
In this article, the fluid dynamics of room temperature liquid metal (RTLM) droplet impacting onto a pool of the same liquid in ambient air was investigated. A series of experiments were conducted in order to disclose the influence of the…