Related papers: Single-pixel 3D imaging with time-based depth reso…
We consider the problem of few-viewpoint 3D surface reconstruction using raw measurements from a lidar system. Lidar captures 3D scene geometry by emitting pulses of light to a target and recording the speed-of-light time delay of the…
State-of-the-art time-of-flight (ToF) based 3D sensors suffer from poor lateral and depth resolutions. In this work, we introduce a novel sensor concept that provides ToF-based 3D measurements of real world objects with depth precisions up…
We demonstrate experimentally the ability to use a single pixel detector for two-dimensional high-speed and high-resolution x-ray imaging. We image the rotation of a spinning chopper at 100-kHz at spatial resolution of about 15 microns by…
Quantitative phase imaging (QPI) is important in many applications such as microscopy and crystallography. To quantitatively reveal phase information, people could either employ interference to map phase distribution into intensity fringes,…
Transient imaging or light-in-flight techniques capture the propagation of an ultra-short pulse of light through a scene, which in effect captures the optical impulse response of the scene. Recently, it has been shown that we can capture…
We present projective parallel single-pixel imaging (pPSI), a 3D photography method that provides a robust and efficient way to analyze the light transport behavior and enables separation of light effect due to global illumination, thereby…
The development of single-photon counting detectors and arrays has made tremendous steps in recent years, not the least because of various new applications in, e.g., LIDAR devices. In this work, a 3D imaging device based on real thermal…
Single-pixel imaging is suitable for low light level scenarios because a bucket detector is employed to maximally collect the light from an object. However, one of the challenges is its slow imaging speed, mainly due to the slow light…
The ill-posed problem of phase retrieval in optics, using one or more intensity measurements, has a multitude of applications using electromagnetic or matter waves. Many phase retrieval algorithms are computed on pixel arrays using discrete…
Recent advances in the field of attosecond science hold the promise of tracking electronic processes at the shortest space and time scales. Imaging methods that combine attosecond temporal with nanometer spatial resolution are currently out…
In current practice, scene survey is carried out by workers using total stations. The method has high accuracy, but it incurs high costs if continuous monitoring is needed. Techniques based on photogrammetry, with the relatively cheaper…
Active stereovision systems for the 3D measurement of surfaces rely on the sequential projection of different fringe patterns onto the scene to robustly and accurately generate 3D surface data. This limits the temporal resolution to the…
We have worked out the details of a single camera, single exposure method to perform three-dimensional imaging of a finite particle cluster. The procedure is based on the plenoptic imaging principle and utilizes a commercial Lytro light…
Timepix3 pixel detectors have demonstrated great potential for tracking applications. With $256\times 256$ pixels, 55 $\mathrm{\mu}$m pitch and improved resolution in time (1.56 ns) and energy (2 keV at 60 keV), they have become powerful…
High-resolution infrared imagers are currently more expensive than CMOS and CCD cameras, due to costly sensor arrays. Van der Waals (vdWs) materials present an opportunity for low-cost, room temperature infrared photodetectors. Although…
This paper shows that accurate underwater 3D shape reconstruction is possible using a single camera, observing a target through a refractive interface. We provide unified reconstruction techniques for a variety of scenarios such as single…
Scene reconstruction in the presence of high-speed motion and low illumination is important in many applications such as augmented and virtual reality, drone navigation, and autonomous robotics. Traditional motion estimation techniques fail…
3D face reconstruction from a single image is a classical and challenging problem, with wide applications in many areas. Inspired by recent works in face animation from RGB-D or monocular video inputs, we develop a novel method for…
In this paper, we present a new algorithm for fast, online 3D reconstruction of dynamic scenes using times of arrival of photons recorded by single-photon detector arrays. One of the main challenges in 3D imaging using single-photon lidar…
Single-pixel imaging (SPI) is very popular in subsampling applications, but the random measurement matrices it typically uses will lead to measurement blindness as well as difficulties in calculation and storage, and will also limit the…