Related papers: An upper bound to multiscale roughness-induced adh…
The effect of self-affine roughness on solid contact is examined with molecular dynamics and continuum calculations. The contact area and normal and lateral stiffnesses rise linearly with the applied load, and the load rises exponentially…
Softer means stickier for solid adhesives, because material compliance facilitates close contact between non-conformal surfaces. Recent discoveries have revealed that soft materials can exhibit a rich array of new physics arising from…
Two surfaces are "sticky" if breaking their mutual contact requires a finite tensile force. At low fractal dimensions D, there is consensus stickiness does not depend on the upper truncation frequency of roughness spectrum (or…
We present an investigation of the role of micropatterning on adhesion properties at soft deformable polydimethylsiloxane (PDMS)/ acrylic adhesive interfaces. Contrary to what has been observed for low aspect ratio rigid patterns, where the…
Contact involving soft materials often combines dry adhesion, sliding friction, and large deformations. At the local level, these three aspects are rarely captured simultaneously, but included in the theoretical models by Mergel et al.…
The most direct measurement of adhesion is the pull-off force, i.e. the tensile force necessary to separate two solids in contact. For a given interface, it depends on various experimental parameters, including separation speed, contact age…
The capillary force was measured by atomic force microscopy between a gold coated sphere mounted on a cantilever and gold surfaces with different roughness. For smooth surfaces the capillary adhesive force surpasses in magnitude any…
As recently suggested in an interestring and stimulating paper by Menga, Carbone & Dini (MCD), applying fracture mechanics energy concepts for the case of a sliding adhesive contact, imposing also the shear stress is constant at the…
The roughness exponent of surfaces obtained by dispersing silica spheres into a quasi-two-dimensional cell is examined. The cell consists of two glass plates separated by a gap, which is comparable in size to the diameter of the beads.…
Adhesion between two bodies is a key parameter in wear processes. At the macroscale, strong adhesive bonds are known to lead to high wear rates, as observed in clean metal-on-metal contact. Reducing the strength of the interfacial adhesion…
Understanding the interfacial electrical properties between metallic electrodes and low dimensional semiconductors is essential for both fundamental science and practical applications. Here we report the observation of thickness reduction…
Mechanical cantilevers are central to nanotechnology, with ultimate sensitivity achieved at the atomic limit, where low bending rigidity makes stability the fundamental challenge. Here, we introduce a wrinkle-induced stiffening approach…
Using stability arguments, this Brief Report suggests that a term that enhances the surface tension in the presence of large height fluctuations should be included in the Kardar-Parisi-Zhang equation. A one-loop renormalization group…
Incremental stiffness characterizes the variation of a material's force response to a small deformation change. Typically materials have an incremental stiffness that is fixed and positive, but recent technologies, such as super-lenses, low…
We develop two new continuum contact models for coupled adhesion and friction, and discuss them in the context of existing models proposed in the literature. Our new models are able to describe sliding friction even under tensile normal…
Solid contacts involving soft materials are important in mechanical engineering or biomechanics. Experimentally, such contacts have been shown to shrink significantly under shear, an effect which is usually explained using adhesion models.…
The load-area relation of rough surfaces is of great interest in tribology. For elastic-plastic solids with strain hardening, an incremental model is adopted to analyze the contact of rough surfaces, in which the contact is modeled by…
In this paper a higher-order mixed finite element method for elastoplasticity with linear kinematic hardening is analyzed. Thereby, the non-differentiability of the involved plasticity functional is resolved by a Lagrange multiplier leading…
Two interleaved phonebooks are nearly impossible to separate by pulling their spines. The very slight force exerted by the outer sheets of the assembly is amplified as the exponential of the square of the number of sheets, leading to a…
Surface roughness is known to easily suppress the adhesion of elastic surfaces. Here a simple model for the contact of \emph{viscoelastic} rough surfaces with significant levels of adhesion is presented. This approach is derived from our…