Related papers: Initial Beam Association in Millimeter Wave Cellul…
Beamforming for mmWave communications is well-studied in the PHY based on the channel parameters to develop optimum receiver processing techniques. However, even before signal processing, antenna structure and radiation parameters affect…
A critical challenge for wireless communications in the millimeter wave (mmWave) bands is blockage. MmWave signals suffer significant penetration losses from many common materials and objects, and small changes in the position of obstacles…
5G millimeter-wave (mmWave) cellular networks are in the early phase of commercial deployments and present a unique opportunity for robust, high-data-rate communication to unmanned aerial vehicles (UAVs). A fundamental question is whether…
Cell discovery is the procedure in which a user equipment (UE) finds a suitable base station (BS) to establish a communication link. When beamforming with antenna arrays is done at both transmitter and receiver, cell discovery in mm wave…
Millimeter wave (mmWave) signals are much more sensitive to blockage, which results in a significant increase of the outage probability, especially for the users at the edge of the cells. In this paper, we exploit the technique of base…
The millimeter wave (mmWave) band has the potential to provide high throughput among wearable devices. When mmWave wearable networks are used in crowded environments, such as on a bus or train, antenna directivity and orientation hold the…
The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas.…
User association is necessary in dense millimeter wave (mmWave) networks to determine which base station a user connects to in order to balance base station loads and maximize throughput. Given that mmWave connections are highly directional…
Deploying Sub-6GHz networks together with millimeter wave (mmWave) is a promising solution to achieve high data rates in traffic hotspots while guaranteeing sufficient coverage, where mmWave small cells are densely deployed to provide high…
Industry 4.0 relies heavily on wireless technologies. Energy efficiency and device cost have played a significant role in the initial design of such wireless systems for industry automation. However, high reliability, high throughput, and…
Millimeter wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing…
Millimeter-wave communications is the most promising technology for next-generation cellular wireless systems, thanks to the large bandwidth available compared to sub-6 GHz networks. Nevertheless, communication at these frequencies requires…
With the explosive growth of mobile data demand, the fifth generation (5G) mobile network would exploit the enormous amount of spectrum in the millimeter wave (mmWave) bands to greatly increase communication capacity. There are fundamental…
We present a beamforming algorithm for multiuser wideband millimeter wave (mmWave) communication systems where one access point uses hybrid analog/digital beamforming while multiple user stations have phased-arrays with a single RF chain.…
This paper proposes a cellular network exploiting millimeter-wave (mmWave) and ultra-densified base stations (BSs) to achieve the far-reaching 5G aim in downlink average rate. The mmWave overlaid network however incurs a pitfall that its…
Emerging applications involving device-to-device communication among wearable electronics require Gbps throughput, which can be achieved by utilizing millimeter wave (mmWave) frequency bands. When many such communicating devices are indoors…
The use of millimeter wave (mmWave) spectrum for commercial wireless communications is expected to offer data rates in the order of Gigabits-per-second, thus able to support future applications such as Vehicle-to-Vehicle or…
To meet the demand of supreme data rates in terabits-per-second, the next-generation mobile system needs to exploit the abundant spectrum in the millimeter-wave and terahertz bands. However, high-frequency transmission heavily relies on…
Hybrid analog and digital beamforming has emerged as a key enabling technology for millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) communication systems since it can balance the trade-off between system performance…
Power consumption is a key challenge in millimeter wave (mmWave) receiver front-ends, due to the need to support high dimensional antenna arrays at wide bandwidths. Recently, there has been considerable work in developing low-power…