Related papers: Packet Error Rate Performance of IEEE802.11g under…
In this paper we compare the packet error rate (PER) and maximum throughput of IEEE 802.11n and IEEE 802.11g under interference from IEEE 802.15.4 by using MATLAB to simulate the IEEE PHY for 802.11n and 802.11g networks.
A 60 GHz wireless Gigabit Ethernet (G.E.) communication system capable of near gigabit data rate has been developed at IETR. The realized system covers 2 GHz available bandwidth. This paper describes the design and realization of the…
The most important standard in wireless local area networks is IEEE 802.11. This is why much of the research work for the enhancement of wireless network is usually based on the behavior of IEEE 802.11 protocol. However, some of the ways in…
IEEE 802.15.4 standard is designed for low power and low data rate applications with high reliability. It operates in beacon enable and non-beacon enable modes. In this work, we analyze delay, throughput, load, and end-to-end delay of…
Bluetooth Low Energy (BLE) is a short-range data transmission technology that is used for multimedia file sharing, home automation, and internet-of-things application. In this work, we perform packet error rate (PER) measurement and RF…
The most common cause of transmission failure in Wireless High Performance (WirelessHP) target industry environments is impulse interference. As interleavers are commonly used to improve the reliability on the Orthogonal Frequency Division…
In recent years, WLAN technology has been gaining popularity around the world with its sub standard 802.11b receiving major deployments in many indoor and outdoor environments. In this article we investigate the performance of IEEE 802.11b…
The fleet management of mobile working machines with the help of connectivity can increase not only safety but also productivity. However, rare mobile working machines have taken advantage of V2X. Moreover, no one published the simulation…
The current cellular standardization for 5G is working towards wireless advances to enable further productivity for industrial automation. However, this development will take several years. Meanwhile, the capabilities of the currently…
We develop an approximate analytical technique for evaluating the performance of multi-hop networks based on beaconless IEEE 802.15.4, a popular standard for wireless sensor networks. The network comprises sensor nodes, which generate…
With the fast development of wireless sensor networks (WSN), more attentions are paid to high data rate transmission of WSN, and hence, in IEEE 802.15.4a standard, ultra-wideband (UWB) is introduced as one of the physical layer technique to…
The aim of this paper is to enhance the quality of Orthogonal Frequency Division Multiplexing OFDM estimation in dedicated vehicular communication transmission V2X networks. Wireless Access in Vehicular Environment WAVE as also known IEEE…
Ergodic capacity and average bit error rate have been widely used to compare the performance of different wireless communication systems. As such recent scientific research and studies revealed strong impact of designing and implementing…
IEEE 802.11 is a widely used wireless LAN standard for medium access control. TCP is a prominent transport protocol originally designed for wired networks. TCP treats packet loss as congestion and reduces the data rate. In wireless networks…
In this paper we explore the problem of achieving efficient packet transmission over unreliable links with worst case occurrence of errors. In such a setup, even an omniscient offline scheduling strategy cannot achieve stability of the…
In this paper, we analyze the bit-error-rate (BER) performance of wireless sensor networks. A wireless sensor node with a single transmitter antenna and multiple receiver antennas is considered here. We consider M (M greater or equal ro 1)…
We present the performance of MIMO for in vivo environments, using ANSYS HFSS and their complete human body model, to determine the maximum data rates that can be achieved using an IEEE 802.11n system. Due to the lossy nature of the in vivo…
As the explosive growth of the ISM band usage continues, there are many scenarios where different systems operate in the same place at the same time. One of growing concerns is the coexistence of heterogeneous wireless network systems. For…
We consider a molecular communication system comprised of a transmitter, an absorbing receiver, and an interference source. Assuming amplitude modulation, we analyze the dependence of the bit error rate (BER) on the detection interval,…
The IEEE 802.11 backoff algorithm is very important for controlling system throughput over contentionbased wireless networks. For this reason, there are many studies on wireless network performance focus on developing backoff algorithms.…