Related papers: Smart-aggregation imaging for single molecule loca…
Sparse sampling schemes have the potential to dramatically reduce image acquisition time while simultaneously reducing radiation damage to samples. However, for a sparse sampling scheme to be useful it is important that we are able to…
In the face of scarcity in detailed training annotations, the ability to perform object localization tasks in real-time with weak-supervision is very valuable. However, the computational cost of generating and evaluating region proposals is…
We present a superpixel method for full spatial phase and amplitude control of a light beam using a digital micromirror device (DMD) combined with a spatial filter. We combine square regions of nearby micromirrors into superpixels by low…
We demonstrate a photon-sensitive, three-dimensional camera by active near-infrared illumination and fast time-of-flight gating. It uses pico-second pump pulses to selectively up-convert the backscattered photons according to their…
Multifocal microscopy (MFM) offers high-speed three-dimensional imaging through the simultaneous image capture from multiple focal planes. Conventional MFM systems use a fabricated grating in the emission path for a single emission…
We report a time-resolved single photon counting (TCSPC) imaging system based on a line-scanning architecture. The system benefits from the high fill-factor, active area, and large dimension of an advanced CMOS single photon avalanche diode…
In recent years, there has been a growing interest in the use of single-photon avalanche diode (SPAD) in optical wireless communication (OWC). SPAD operates in the Geiger mode and can act as a photon counting receiver obviating the need for…
A defocusing imaging technique has been used as a diagnostic to identify binary agglomerates (dimers) in complex plasmas. Quasi-two-dimensional plasma crystal consisting of monodisperse spheres and binary agglomerates has been created where…
Scalable atom-based quantum platforms for simulation, computing, and metrology require fast high-fidelity, low-loss imaging of individual atoms. Standard fluorescence detection methods rely on continuous cooling, limiting the detection…
Current multispectral imagers suffer from low photon efficiency and limited spectrum range. These limitations are partially due to the technological limitations from array sensors (CCD or CMOS), and also caused by separative measurement of…
Single-photon light detection and ranging (LiDAR) is a key technology for depth imaging through complex environments. Despite recent advances, an open challenge is the ability to isolate the LiDAR signal from other spurious sources…
Fast and sensitive detector arrays enable image scanning microscopy (ISM), overcoming the trade-off between spatial resolution and signal-to-noise ratio (SNR) typical of confocal microscopy. However, current ISM approaches cannot provide…
Single-photon detectors (SPDs) are widely used in applications requiring extremely weak light detection. In the near-infrared region, SPDs based on InGaAs/InP single-photon avalanche diodes (SPADs) are the primary candidates for practical…
We have developed a single-shot imaging technique that can capture ultrafast events occurring on femtosecond to picosecond time scales. The technique is based on an optical pump-probe method, in which multiple time-delayed femtosecond…
I present a semiclassical analysis of a spatial-mode demultiplexing (SPADE) measurement scheme for far-field incoherent optical imaging under the effects of diffraction and photon shot noise. Building on previous results that assume two…
The application of silicon photomultiplier (SiPM) technology for weak-light detection at a single photon level has expanded thanks to its better photon detection efficiency in comparison to a conventional photomultiplier tube (PMT). SiPMs…
Detecting light is fundamental to all optical experiments and applications. At the single photon level, the quantised nature of light requires specialised detectors, which typically saturate for more than one photon, rendering the…
Single-pixel imaging (SPI) is significant for applications constrained by transmission bandwidth or lighting band, where 3D SPI can be further realized through capturing signals carrying depth. Sampling strategy and reconstruction algorithm…
Single molecule localization microscopy relies on the precise quantification of the position of single dye emitters in a sample. This precision is improved by the number of photons that can be detected from each molecule. It is therefore…
Entangled photons have the remarkable ability to be more sensitive to signal and less sensitive to noise than classical light. Joint photons can sample an object collectively, resulting in faster phase accumulation and higher spatial…