Related papers: Wi-Fi/WiGig Coordination for Optimal WiGig Concurr…
To promote the practicality of deep learning-based localization, existing studies aim to address the issue of scenario dependence through meta-learning. However, these studies primarily focus on variations in environmental layouts while…
RF fingerprinting leverages circuit-level variability of transmitters to identify them using signals they send. Signals used for identification are impacted by a wireless channel and receiver circuitry, creating additional impairments that…
Millimeter wave (mmW) wireless networks are capable to support multi-gigabit data rates, by using directional communications with narrow beams. However, existing mmW communications standards are hindered by two problems: deafness and single…
Densification of access points (APs) in wireless local area networks (WLANs) increases the interference and the contention domains of each AP due to multiple overlapped basic service sets (BSSs). Consequently, high interference from…
Millimeter wave (mmWave) will play a significant role as a 5G candidate in facing the growing demand of enormous data rate in the near future. The conventional mmWave standard, IEEE 802.11ad, considers establishing only one mmWave link in…
LTE-Licensed Assisted Access (LAA) networks are beginning to be deployed widely in major metropolitan areas in the US in the unlicensed 5 GHz bands, which have existing dense deployments of Wi-Fi. This provides a real-world opportunity to…
WiGig networks and 60 GHz frequency communications have a lot of potential for commercial and personal use. They can offer extremely high transmission rates but at the cost of low range and penetration. Due to these issues, WiGig systems…
Future networks will pave the way for a myriad of applications with different requirements and Wi-Fi will play an important role in local area networks. This is why network slicing is proposed by 5G networks, allowing to offer multiple…
Millimeter Wave (mm-w), especially the 60 GHz band, has been receiving much attention as a key enabler for the 5G cellular networks. Beamforming (BF) is tremendously used with mm-w transmissions to enhance the link quality and overcome the…
In wireless networks, the transmission rate of a link is determined by received signal strength, interference from simultaneous transmissions, and available coding-modulation schemes. Rate allocation is a key problem in wireless network…
The effective utilization of unlicensed spectrum is regarded as an important direction to enable the massive access and broad coverage for next-generation wireless local area network (WLAN). Due to the crowded spectrum occupancy and dense…
5G has to fulfill the requirements of ultra-dense, scalable, and customizable networks such as IoT while increasing spectrum and energy efficiency. Given the diversity of envisaged applications and scenarios, one crucial property for 5G New…
White-Fi refers to WiFi deployed in the TV white spaces. Unlike its ISM band counterparts, White-Fi must obey requirements that protect TV reception. As a result, optimization of citywide White-Fi networks faces the challenges of…
This paper concerns sub-channel allocation in multi-user wireless networks with a view to increasing the network throughput. It is assumed there are some sub-channels to be equally divided among active links, such that the total sum rate…
This paper presents the design and the realization of a hybrid wireless Gigabit Ethernet indoor communications system operating at 60 GHz. As the 60 GHz radio link operates only in a single-room configuration, an additional Radio over Fiber…
In dense neighborhoods, there are often dozens of homes in close proximity. This can either be a tight city-block with many single-family homes (SFHs), or a multiple dwelling units (MDU) complex (such as a big apartment building or…
This paper considers the problem of beam alignment in a cell-free massive MIMO deployment with multiple access points (APs) and multiple user equipments (UEs) simultaneously operating in the same millimeter wave frequency band. Assuming the…
The latest IEEE 802.11 amendments provide support to directional communications in the Millimeter Wave spectrum and, thanks to the wide bandwidth available at such frequencies, makes it possible to wirelessly approach several emergent use…
Since the spectrum below 6 GHz bands is insufficient to meet the high bandwidth requirements of 5G use cases, 5G networks expand their operation to mmWave bands. However, operation at these bands has to cope with a high penetration loss and…
Data traffic over wireless communication networks has experienced a tremendous growth in the last decade, and it is predicted to exponentially increase in the next decades. Enabling future wireless networks to fulfill this expectation is a…