Related papers: Plastically-driven variation of elastic stiffness …
A micromechanical approach is set-up to analyse the increase in elastic stiffness related to development of plastic deformation (the elastoplastic coupling concept) occurring during the compaction of a ceramic powder. Numerical simulations…
The two key phenomena occurring in the process of ceramic powder compaction are the progressive gain in cohesion and the increase of elastic stiffness, both related to the development of plastic deformation. The latter effect is an example…
The simulation of industrial processes involving cold compaction of powders allows for the optimization of the production of both traditional and advanced ceramics. The capabilities of a constitutive model previously proposed by the authors…
Mechanical experiments have been designed and performed to investigate the elasto-plastic behaviour of green bodies formed from an aluminum silicate spray dried powder used for tiles production. Experiments have been executed on samples…
The quasistatic behavior of a simple 2D model of a cohesive powder under isotropic loads is investigated by Discrete Element simulations. The loose packing states, as studied in a previous paper, undergo important structural changes under…
Mechanical densification of granular bodies is a process in which a loose material becomes increasingly cohesive as the applied pressure increases. A constitutive description of this process faces the formidable problem that granular and…
The role of plastic deformation in the high-pressure compaction of granular material is investigated using bonded particle model simulations. Grains are discretized into a set of computational particles connected by pairwise bonds. Bonds…
The high-pressure compaction of three dimensional granular packings is simulated using a bonded particle model (BPM) to capture linear elastic deformation. In the model, grains are represented by a collection of point particles connected by…
The process of crumpling a sheet and compacting it into a ball is dependent on many parameters that are difficult to disentangle. We study the effect of plasticity on the crumpling process, and disentangle the effects of plasticity and…
We demonstrate that plastic deformation in solids is associated with a dynamic transition that is reminiscent to the transition from a superconducting to a mixed phase in Type II superconductors. We report analytic calculations, extensive…
A crystal plasticity theory was developed for use in simulations of dynamic loading at high pressures and strain rates. At pressures of the order of the bulk modulus, compressions o(100%) may be induced. At strain rates o(10^9)/s or higher,…
An extensive numerical campaign of particle mechanics calculations that predict microstructure formation and evolution during die compaction, up to relative densities close to one, of monodisperse plastic spheres that exhibit power-law…
An improved linear model is developed for elasto-plastic and adhesive contact. New correlations are proposed and validated to estimate the key input parameters of the model, including contact stiffness, yield point, maximum pull-off force…
The sticking of a soft polystyrene colloidal particle to a planar glass plate was studied by a microrheological technique using an optical tweezer to trap the particle and a piezoelectric-stage to position the plate and to sinusoidally…
We investigate the dependence of the hardness of materials on their elastic stiffness. This is possible by constructing a series of model potentials of the Morse type; starting on modelling natural Cu, the model potential exhibit an…
Everyday experience shows that cellular sheets are stiffened by the presence of a pressurized gas: from bicycle inner tubes to bubble wrap, the presence of an internal pressure increases the stiffness of otherwise floppy structures. The…
Soft composite solids are made of inclusions dispersed within soft matrices. They are ubiquitous in nature and form the basis of many biological tissues. In the field of materials science, synthetic soft composites are promising candidates…
We investigate the cyclic mechanical behavior in uniaxial tension of three different commercial thermoplastic polyurethane elastomers (TPU) often considered as a sustainable replacement for common filled elastomers. All TPU have similar…
The elastic coupling between plastic events is generally invoked to interpret plastic properties and failure of amorphous soft glassy materials. We report an experiment where the emergence of a self-organized plastic flow is observed well…
We have investigated experimentally the influence of a magnetic interaction between the grains on the compaction dynamics of a granular pile submitted to a series of taps. The granular material used to perform this study is a mixture of…