Related papers: Two adhesive-contact models for quasistatic mixed-…
Modeling membrane interactions with arbitrarily shaped colloidal particles, such as environmental micro- and nanoplastics, at the cell scale remains particularly challenging, owing to the complexity of particle geometries and the need to…
An improved linear model is developed for elasto-plastic and adhesive contact. New correlations are proposed and validated to estimate the key input parameters of the model, including contact stiffness, yield point, maximum pull-off force…
The mechanical properties of metal matrix fiber-reinforced composites depend on many aspects of their structure in a complicated way. In this paper, we propose a \emph{minimalistic} approach to study interface debonding, matrix cracking,…
Deformations of liquid interfaces by the optical radiation pressure of a focused laser wave were generally expected to display similar behavior, whatever the direction of propagation of the incident beam. Recent experiments showed that the…
The method of iterated conformal maps is developed for quasi-static fracture of brittle materials, for all modes of fracture. Previous theory, that was relevant for mode III only, is extended here to mode I and II. The latter require…
This research rigorously investigates the convergence of adaptive finite element methods for regularized variational models of quasi-static brittle fracture in elastic solids. We specifically examine a novel Ambrosio-Tortorelli (AT1)…
Contact involving soft materials often combines dry adhesion, sliding friction, and large deformations. At the local level, these three aspects are rarely captured simultaneously, but included in the theoretical models by Mergel et al.…
We present an energy-preserving mechanic formulation for dynamic quasi-brittle fracture in an Eulerian-Lagrangian formulation, where a second-order phase-field equation controls the damage evolution. The numerical formulation adapts in…
We propose an energy-stable parametric finite element method (ES-PFEM) for simulating solid-state dewetting of thin films in two dimensions via a sharp-interface model, which is governed by surface diffusion and contact line (point)…
Accurate simulations are essential for engineering applications, and intricate continuum mechanical material models are constructed to achieve this goal. However, the increasing complexity of the material models and geometrical properties…
The transition from static to dynamic friction when an elastic body is slid over another is now known to result from the motion of interface rupture fronts. These fronts may be either crack-like or pulse-like, with the latter involving…
The effects of shear on energy release rate and mode mixity in a symmetric sandwich beam with isotropic layers and a debond crack at the face sheet/core interface are investigated through a semi-analytic approach based on two-dimensional…
We investigate elastic-plastic adhesive wear via a continuum variational phase-field approach. The model seamlessly captures the transition from perfectly brittle, over quasi-brittle to elastic-plastic wear regimes, as the ductility of the…
Fluid-structure systems occur in a range of scientific and engineering applications. The immersed boundary(IB) method is a widely recognized and effective modeling paradigm for simulating fluid-structure interaction(FSI) in such systems,…
Flexible barriers are increasingly used for the protection from debris flow in mountainous terrain due to their low cost and environmental impact. However, a numerical tool for rational design of such structures is still missing. In this…
Fracture of viscoelastic materials is considered to be a complex phenomenon due to their highly rate sensitive behavior. In this context, we are interested in the quasi-static response of a viscoelastic solid subjected to damage. This paper…
In the phase-field modeling of brittle fracture, anisotropic constitutive assumptions for the degradation of stored elastic energy due to fracture are crucial to preventing cracking in compression and obtaining physically sound numerical…
We develop two new continuum contact models for coupled adhesion and friction, and discuss them in the context of existing models proposed in the literature. Our new models are able to describe sliding friction even under tensile normal…
The diffuse-interface model (DIM) is a tool for studying interfacial dynamics. In particular, it is used for modeling contact lines, i.e., curves where a liquid, gas, and solid are in simultaneous contact. As well as all other models of…
Usage, manipulation, transport, delivery, and mixing of granular or particulate media, comprised of spherical or polyhedral particles, is commonly encountered in industrial sectors of construction (cement and rock fragments), pharmaceutics…