Related papers: Passively Q-switched EDFL using Fe3O4-nanoparticle…
We demonstrate a wideband-tunable Q-switched fiber laser exploiting a graphene saturable absorber. We get ~2us pulses, tunable between 1522 and 1555nm with up to~40nJ energy. This is a simple and low-cost light source for metrology,…
The ultrashort pulse laser operation is crucially defined by engaging explicit modulators. Conventionally, they are laborious to incorporate into an all-fibre design or involve the design of sophisticated cavities. We exploit Thulium-doped…
We report a passively mode-locked erbium-doped fiber laser with pulsewidths switchable from 473 fs to 76.8 ns, where the fundamental mode-locking, noise-like pulse, nanosecond mode-locking, and dual-width mode-locking are obtained by…
We demonstrate an all-fiber mode-locked laser at all-normal dispersion with a saturable absorber, which is based on a section of grade-index multimode fiber with inner microcavity embedded in the splice points. The absorption modulation…
We experimentally demonstrate the realization of a half-polarization-maintaining (half-PM) fiber laser, in which mode-locking is provided by a reflective multimode-interference saturable absorber (SA). In the specially designed SA, linearly…
We report high-energy mid-infrared pulse generation by Q-switching of dysprosium-doped fiber lasers for the first time. Two different modulation techniques are demonstrated. Firstly, using active acousto-optic modulation, pulses are…
We experimentally demonstrate a linear-cavity all-fiber passively Q-switching cylindrical vector beam (CVB) laser operating in high-order mode. This CVB fiber laser operates without any mode converter which always leads to high insertion…
We report the precise characterization of the optical potential obtained by injecting a distributed-feedback erbium-doped fiber laser (DFB EDFL) at 1560 nm to the transversal modes of a folded optical cavity. The optical potential was…
It attracts wide interest to seek universe saturable absorber covering wavelengths from near infrared to mid-infrared band. Multilayer black phosphorus, with variable direct bandgap (0.3-2 eV) depending on the layer number, becomes a good…
We have specifically investigated the free-space mode locking dynamics of erbium-doped fiber (EDF) mode-locked ultrafast lasers via nonlinear polarization rotation (NPR) in the normal dispersion regime. To do so, we built a passively…
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave…
A high-performance S-band single-longitudinal-mode (SLM) erbium-doped fiber (EDF) ring cavity laser based on a depressed cladding EDF is investigated and experimentally demonstrated. We combine a double-ring passive resonator (DR-PR) and a…
We report on a mid-infrared mode-locked fiber laser that uses an acousto-optic tunable filter to achieve frequency-shifted feedback pulse generation with frequency tuning over a 215 nm range. The laser operates on the 3.5 ${\mu}$m…
We propose and demonstrate a high performance four-wavelength erbium-doped fiber laser (EDFL), enabled by a figure-8 compound-ring-cavity (F8-CRC) filter for single-longitudinal-mode (SLM) selection and a polarization-managed four-channel…
Recently, a new emerging field about heavily-doped colloidal plasmonic nanocrystals (NCs) has attracted great attention due to their lower and expediently adjustable free carrier densities, lower and tunable LSPR band in the spectral range…
Chip-scale, high-energy optical pulse generation is becoming increasingly important as we expand activities into hard to reach areas such as space and deep ocean. Q-switching of the laser cavity is the best known technique for generating…
An all-silica-fiber thulium-doped fiber laser emitting at 0.82 um on the transition from 3H4 to the ground state 3H6 outputs 105 W continuous-wave (CW) power and 555 W quasi-continuous-wave (QCW) instantaneous power with 0.96% duty cycle in…
Saturable absorbers are a key component for mode-locking femtosecond lasers. Polymer films containing graphene flakes have recently been used in transmission as laser mode-lockers, but suffer from high nonsaturable loss, limiting their…
Due to its unique electronic property and the Pauli Blocking Principle, atomic layer graphene possesses wavelength-independent ultrafast saturable absorption, which can be exploited for the ultrafast photonics application. Through chemical…
Achieving compact on-chip pulsed lasers with attractive performance metrics and compatibility with the silicon photonics platform is an important, yet elusive, goal in contemporary nanophotonics. Here, the fundamental question of whether 2D…