Related papers: SiNx:Tb3+--Yb3+, an efficient down-conversion laye…
Integrated photonic devices made of silicon nitride (SiN), which can be integrated with silicon-on-insulator and III-V platforms, are expected to drive the expansion of silicon photonics technology. However, the relatively low refractive…
A design tool was formulated for optimizing the efficiency of inorganic, thin-film, photovoltaic solar cells. The solar cell can have multiple semiconductor layers in addition to antireflection coatings, passivation layers, and buffer…
We demonstrate the controlled creation of a $\mathrm{^{174}Yb^{2+}}$ ion by photo-ionizing $\mathrm{^{174}Yb^+}$ with weak continuous-wave lasers at ultraviolet wavelengths. The photo-ionization is performed by resonantly exciting…
The upconversion process for the $Er^{3+}$ ion, when irradiated with IR photons at 980 nm, strongly depends upon the presence of the sensitizer $Yb^{3+}$ ions. There is a good correlation between the relative and absolute concentrations of…
Thin film solar cells have been attractive for decades in advanced green technology platforms due to its possibilities to be integrated with buildings and on-chip applications. However, the bottleneck issues involved to consider the current…
We have fabricated highly-luminescent samples with erbium-doped amorphous silicon sub-oxide (a-SiOx<Er>) layers on SiO2/Si substrates. The layers are designed to provide a resonance with large modal overlap with the active material and with…
The tunability of the chemical potential for a wide range encompassing the Dirac point is important for many future devices based on topological insulators. Here we report a method to fabricate highly efficient top gates on epitaxially…
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition…
We report on very high enhancement of thin layer's absorption through band-engineering of a photonic crystal structure. We realized amorphous silicon (aSi) photonic crystals, where slow light modes improve absorption efficiency. We show…
Silicon films doped with Er and O were prepared by techniques of physical vapor deposition on crystalline silicon, ion beam mixing and oxygen incorporation through Ar+ and O2+ implantation, and thermal annealing. Processing steps were…
We make the first study the optical energy level structure and interactions of pairs of single rare earth ions using a hybrid electro-optical detection method applied to Er-implanted silicon. Two examples of Er3+ pairs were identified in…
Absolute cross sections for the {\it K}-shell photoionization of boron-like (B-like) O$^{3+}$ ions were measured by employing the ion-photon merged-beam technique at the SOLEIL synchrotron-radiation facility in Saint-Aubin, France.…
Amorphous silicon carbide (a-SiC) has emerged as a compelling candidate for applications in integrated photonics, known for its high refractive index, high optical quality, high thermo-optic coefficient, and strong third-order…
In2S3(1-x)O3x is known from preceding studies to have a bandgap varying continuously as a function of x, the reason why this solid solution is potentially interesting in the field of photovoltaics. In this work, we present results on…
Superconducting Nb3Sn films can be synthesized by controlling the atomic concentration of Sn. Multilayer sequential sputtering of Nb and Sn thin films followed by high temperature annealing is considered as a method to fabricate Nb3Sn…
Selenium has resurged as a promising photovoltaic material in solar cell research due to its wide direct bandgap of 1.95 eV, making it a suitable candidate for a top cell in tandem photovoltaic devices. However, the optoelectronic quality…
We report on the fabrication of two-dimensional periodic photonic nanostructures by nanoimprint lithography and dry etching, and their integration into a 1-{\mu}m-thin mono-crystalline silicon solar cell. Thanks to the periodic…
In this study we synthesized thin films of titanium oxide doped with thulium and/or ytterbium to modify the incident spectrum on the solar cells. This could be achieved either by photoluminescence up-converting devices, or down-converting…
Thin films are preferred for high photocurrent conversion efficiency, but strong photon absorption at photon energies below the bandgap (near and shortwave infrared) typically requires thicker semiconductor layers. To address this tradeoff,…
Solar modules are currently characterized at standard test conditions (STC), defined at 1000W/m2 and 25 {\deg}C. However, solar modules in actual outdoor operating conditions typically operate at lower illumination and higher temperature…