Related papers: Apparatus and method for plasma processing of SRF …
Pulsed-laser dry printing of noble-metal microrings with a tunable internal porous structure, which can be revealed via an ion-beam etching post-procedure, was demonstrated. Abundance and average size of the pores inside the microrings were…
Magnetic flux trapped during the cooldown of superconducting radio-frequency cavities through the transition temperature due to incomplete Meissner state is known to be a significant source of radio-frequency losses. The sensitivity of flux…
At EuPRAXIA@SPARC_LAB, the unique combination of an advanced high-brightness RF injector and a plasma-based accelerator will drive a new multi-disciplinary user-facility. The facility, that is currently under study at INFN-LNF Laboratories…
A superfluid atomic gas is prepared inside an optical resonator with an ultra-narrow band width on the order of the single photon recoil energy. When a monochromatic off-resonant laser beam irradiates the atoms, above a critical intensity…
A deeply modulated, regular, continuous, oscillating current waveform is reliably and repeatably achieved during electropolishing of niobium single-cell elliptical radiofrequency cavities. Details of the technique and cavity test results…
Field emission is one of the key issues in superconducting RF for particle accelerators. When present, it limits operating gradient directly or via induced heat load at 2K. In order to minimize particulate contamination of and thus field…
We demonstrate continuous loading of strontium atoms into a high finesse ring cavity and observe continuous strong collective coupling in the form of a vacuum Rabi splitting between the atoms and the cavity on the 7.5 kHz transition $^1{\rm…
It is well known that the tuning of a long radio-frequency quadrupole accelerator is demanding. This study investigated how to realize efficient long RFQ accelerators with multiple shorter and independent cavities. From the RF point of…
A microfabricated Fabry-Perot optical resonator has been used for atom detection and photon production with less than 1 atom on average in the cavity mode. Our cavity design combines the intrinsic scalability of microfabrication processes…
Microcavity plasma arrays of inverse pyramidal cavities have been fabricated in p-Si wafers. Each cavity acts as a microscopic dielectric barrier discharge. Operated at atmospheric pressure in argon and excited with high voltage at about 10…
A new flash (ultra-rapid) spark plasma sintering method applicable to various materials systems, regardless of their electrical resistivity, is developed. A number of powders ranging from metals to electrically insulative ceramics have been…
We propose a scheme for the ultrafast control of the emitter-field coupling rate in cavity quantum electrodynamics. This is achieved by the control of the vacuum field seen by the emitter through a modulation of the optical modes in a…
The technique presented in this paper enables the regulation of both radio frequency amplitude and phase in narrow band devices such as a Superconducting RF (SRF) cavity driven by constant power output devices i.e. magnetrons. The ability…
Muon beam-induced plasma loading of radio-frequency (RF) cavities filled with high pressure hydrogen gas with 1% dry air dopant has been studied via numerical simulations. The electromagnetic code SPACE, that resolves relevant atomic…
A new method of controllable injection to generate high quality electron bunches in the nonlinear blowout regime driven by electron beams is proposed and demonstrated using particle-in-cell simulations. Injection is facilitated by…
We propose a scheme for generating two-mode squeezing in high-Q resonators using a beam of atoms with random arrival times, which acts as a reservoir for the field. The scheme is based on four-wave mixing processes leading to emission into…
We present a feasible protocol using traveling wave field to experimentally observe negative response, i.e., to obtain a decrease in the output field intensity when the input field intensity is increased. Our protocol uses one beam splitter…
This dissertation explores the interaction between high-intensity lasers and plasmas to accelerate electrons and produce radiation via experimental and computational efforts. The laser pulses used in this dissertation have ultrashort…
We present an analytical model for electron self-injection in nonlinear, multidimensional plasma wave excited by short laser pulse in the bubble regime or by short electron beam in the blowout regime. In this regimes, which are typical for…
Electron Cyclotron Resonance Ion Sources are currently the most efficient ion sources among those used in facilities dedicated to nuclear physics. The need for a more flexible magnetic field and RF injection system suggested to design and…