Related papers: Analysis Of SnS2 Buffer Layer And SnS Back Surface…
We employ simulation based approach for enhancing the efficiency of Cu2ZnSnS4 (CZTS) based solar cells. Initial benchmarking of simulation with the experimentally reported solar cell in literature is performed by incorporating a suitable…
Traditional CdS buffer layer in selenium-free Cu(In,Ga)S2 solar cells leads to reduced open-circuit voltage because of a negative conduction band offset at the Cu(In,Ga)S2/CdS interface. Reducing this loss necessitates the substitution of…
This study investigates the critical role of buffer layers in enhancing the efficiency of thin-film CdTe solar cells. We explore non-toxic buffer materials, specifically ZnSe, ZnMgO, 3C-SiC, and WS2, as potential replacements for the…
Cu2ZnSnS(e)4 (CZTS(e)) solar cells have attracted much attention due to the elemental abundance and the non-toxicity. However, the record efficiency of 12.6% for Cu2ZnSn(S,Se)4 (CZTSSe) solar cells is much lower than that of Cu(In,Ga)Se2…
Sulfide chalcopyrite, Cu(In,Ga)S2, having wide bandgap (larger than 1.5 eV), favorable optoelectronic properties, and high stability, is a promising top-cell absorber for tandem applications. Adapting device structures optimized for 1.0 -…
We simulated photovoltaic characteristics of single heterojunction solar cell with Cu2ZnSnS4 and Cu2ZnSnSe4 absorber layer numerically using one dimensional solar cell capacitance simulator (SCAPS-1D). n-CdS/ZnO double buffer layer is used…
Kesterite is a leading candidate among inorganic thin-film photovoltaic technologies, offering sustainable and environmentally friendly solutions without reliance on critical raw materials. This study investigates the performance of…
Dual-absorber solar cells represent a promising approach to surpass the efficiency limit of single-junction devices by extending spectral absorption and minimizing thermalization losses. Among earth-abundant thin-film materials, kesterites…
This paper proposes an efficient three-layered p-GaAs/p-CIGS/n-CdS (PPN), a unique solar cell architecture. Copper indium gallium selenide (CIGS)-based solar cells exhibit substantial performance than the ones utilizing cadmium sulfide…
Cu2ZnSnS4 (CZTS) is a promising photovoltaic absorber material with earth abundant and nontoxic elements. However, the detrimental native defects and secondary phases of CSTS will largely reduce the energy conversion efficiencies. To…
Ternary chalcostibite copper antimony selenide (CuSbSe2) is a promising absorber material for next generation thin film solar cells due to the non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap and high…
Solution-processed intrinsic ZnO and Al doped ZnO (ZnO:Al) were spin coated on textured n-type c-Si wafer to replace the phosphorus doped amorphous silicon as the electron selective transport layer (ESTL) of the Si heterojunction (SHJ)…
Solar cells with the structure ITO-PEDOT:PSS-Ag:SnS-Al were fabricated with the active layer of tin sulphide with silver nano-particles (Ag:SnS) grown by thermal co-evaporation. To understand the influence of the silver nanoparticles on the…
The monolithic tandem integration of third-generation solar energy materials on silicon holds great promise for photoelectrochemistry and photovoltaics. However, this can be challenging when it involves high-temperature reactive processes,…
We present evidence that band gap narrowing at the heterointerface may be a major cause of the large open circuit voltage deficit of Cu$_2$ZnSnS$_4$/CdS solar cells. Band gap narrowing is caused by surface states that extend the…
We considered modification of the defect density of states in CdTe as influenced by a buffer layer in ZnO(ZnS, SnSe)/CdS/CdTe solar cells. Compared to the solar cells employing ZnO buffer layers, implementation of ZnSe and ZnS resulted in…
Interface recombination at the absorber buffer interface impedes the efficiency of a solar cell with an otherwise excellent absorber. The internal voltage or the quasi-Fermi level splitting (qFLs) measures the quality of the absorber.…
A systematic survey and subsequent research have been made on MoTe2-based n-CdS/p-MoTe2/p+-CGS device in solar cell and photodetector field. The optimization has been established by altering the various properties of each constituent layer…
In this work, first principle calculations of Cu$_2$ZnSnS$_4$ (CZTS), Cu$_2$ZnGeS$_4$ (CZGS) and Cu$_2$ZnSiS$_4$ (CZSS) are performed to highlight the impact of the cationic substitution on the structural, electronic and optical properties…
Solar cells based on kesterite-type $Cu_2ZnSnS_4$ (CZTS) thin films were fabricated using a chemical route to prepare the $CZTS$ films, consisting in sequential deposition of $Cu_2SnS_3$ (CTS) and $ZnS$ thin films followed by annealing at…