Related papers: Cu2ZnSnS4 Films using an Eco-friendly Direct Liqui…
Solar cells based on kesterite-type $Cu_2ZnSnS_4$ (CZTS) thin films were fabricated using a chemical route to prepare the $CZTS$ films, consisting in sequential deposition of $Cu_2SnS_3$ (CTS) and $ZnS$ thin films followed by annealing at…
Thin-film solar cells based on the semiconductor Cu$_2$ZnSnS$_4$ (CZTS) are a promising candidate for Terawatt-scale renewable energy generation. While CZTS is composed of earth abundant and non-toxic elements, arranged in the kesterite…
Dual-absorber solar cells represent a promising approach to surpass the efficiency limit of single-junction devices by extending spectral absorption and minimizing thermalization losses. Among earth-abundant thin-film materials, kesterites…
Cu2ZnSnS(e)4 (CZTS(e)) solar cells have attracted much attention due to the elemental abundance and the non-toxicity. However, the record efficiency of 12.6% for Cu2ZnSn(S,Se)4 (CZTSSe) solar cells is much lower than that of Cu(In,Ga)Se2…
The monolithic tandem integration of third-generation solar energy materials on silicon holds great promise for photoelectrochemistry and photovoltaics. However, this can be challenging when it involves high-temperature reactive processes,…
In the quest for efficient and cost-effective photovoltaic absorber materials beyond silicon, considerable attention has been directed toward exploring alternatives. One such material, zincblende-derived Cu2ZnSnS4 (CZTS), has shown promise…
Coating and reflecting thin films for energy harvesting purposes are interesting topics in both theoretical and experimental research. The thin film could help to enhance the absorption of the system via its specific optical properties…
In this work, first principle calculations of Cu$_2$ZnSnS$_4$ (CZTS), Cu$_2$ZnGeS$_4$ (CZGS) and Cu$_2$ZnSiS$_4$ (CZSS) are performed to highlight the impact of the cationic substitution on the structural, electronic and optical properties…
A comparative study of the structural, optical and morphological properties of Cu2ZnSnS4 (CZTS) thin films prepared by two different techniques was performed. One consists of sequential evaporation of the elemental metallic precursors under…
Cu2ZnSnS4 (CZTS) is a promising photovoltaic absorber material with earth abundant and nontoxic elements. However, the detrimental native defects and secondary phases of CSTS will largely reduce the energy conversion efficiencies. To…
Power-conversion efficiency is a critical factor for the wider adoption of solar-cell modules. Thin-film solar cells are cheap and easy to manufacture, but their efficiencies are low compared to crystalline-silicon solar cells and need to…
Cu2ZnSn(S, Se)4 (CZTSSe) is one of most competitive photovoltaic materials for its earth-abundant reserves, environmental friendliness, and high stability.The quality of CZTSSe absorber determines the power-conversion efficiency (PCE) of…
Following the recent success of monolithically integrated Perovskite/Si tandem solar cells, great interest has been raised in searching for alternative wide bandgap top-cell materials with prospects of a fully earth-abundant, stable and…
We simulated photovoltaic characteristics of single heterojunction solar cell with Cu2ZnSnS4 and Cu2ZnSnSe4 absorber layer numerically using one dimensional solar cell capacitance simulator (SCAPS-1D). n-CdS/ZnO double buffer layer is used…
The electronic and optical properties of CdGa2Te4 and ZnGa2Te4 were studied using first-principles DFT calculations. Band gaps were calculated using the GGA-PBESol functional. Both materials show promise for photovoltaic applications…
Thin-film photovoltaic (PV) technologies address crucial challenges in solar energy applications, including scalability, cost-effectiveness, and environmental sustainability. This paper reviews critically, thin-film technologies such as…
Development of alternative thin film photovoltaic technologies is an important research topic due to the potential for low-cost, large-scale fabrication of high-efficiency solar cells. Despite the large number of promising alternative…
We investigate the synthesis of kesterite Cu2ZnSnS4 (CZTS) polycrystalline thin films using cosputtering from binary sulfide targets followed by annealing in sulfur vapor at 500 {\deg}C to 650 {\deg}C. The films are the kesterite CZTS phase…
Thin-film solar cells based on kesterite (Cu2ZnSnSe4) material are a promising alternative for photovoltaic devices due to their composition consisting of earth abundant elements, ease of production at a relatively low temperatures and…
The Cu2ZnSn(S, Se)4 (CZTSSe) emerging inorganic solar cell is highly promising for accelerating the large-scale and low-cost applications of thin-film photovoltaics. It possesses distinct advantages such as abundant and non-toxic…