Related papers: Substrate effects and diffusion dominated rougheni…
The effects of substrate treatment, temperature and composition on the surface morphology of Ni-Cr thin films grown on MgO(001) are studied by scanning tunneling microscopy (STM) and atomic force microscopy (AFM). A combination of…
The results of RHEED, FTIR and Raman spectroscopy study of silicon and germanium films with the thickness up to 200 nm grown from molecular beams on dielectric Si$_3$N$_4$/SiO$_2$/Si(001) substrates are presented. Noticeable changes of the…
Reactive dual ion beam sputter deposition of AlN thin films was carried out for the analysis of surface growth characteristics by Atomic Force Microscopy. The variation of roughness as a function of deposition time was analysed by Dynamic…
We study the effect of the growth orientation on the structural, electronic, and hence transport properties of Sr$_2$CoNbO$_6$ thin films grown on the orthorhombic NGO(100) and cubic MgO(100) substrates. The x-ray diffraction patterns show…
This Letter reports an anomaly of film porosity dependence on deposition rate during physical vapor deposition - the porosity increases as deposition rate decreases. Using glancing angle deposition of Cu on SiO2 substrate, the authors show…
The interface between hexagonal ZnO films and cubic MgO (001) substrates, fabricated through molecular beam epitaxy, are thoroughly investigated. X-ray diffraction and (scanning) transmission electron microscopy reveal that, at the…
Amorphous boron carbide (B4C) thin films are by far the most popular form for the neutron converting layers in the 10B-based neutron detectors, which are a rising trend in detector technologies in response to the increasing scarcity and…
Here we report the evolution of Ni stress in electroplated Ni films and investigate its origins as a function of electroplating time. First, low stress 200-nm-thick Ti / 200-nm thick Ni seed layers are deposited onto Si (100) wafers via…
NiO layers were grown on MgO(100), MgO(110), and MgO(111) substrates by plasma-assisted molecular beam epitaxy under Ni-flux limited growth conditions. Single crystalline growth with a cube-on-cube epitaxial relationship was confirmed by…
By using the pulsed-laser-ablation technique, we have successfully grown the La$_{3}$Ni$_{2}$O$_{7-\delta}$ thin films with $c$-axis orientation perpendicular to the film surface. X-ray diffraction shows that the (00l) peaks can be well…
NiFe$_2$O$_4$ thin films with varying thickness were grown on SrTiO$_3$(001) by reactive molecular beam epitaxy. Soft and hard x-ray photoelectron spectroscopy measurements reveal a homogeneous cation distribution throughout the whole film…
Nanocomposite films of Zinc Oxide and Silicon were grown by thermal evaporation technique using varying ratios of ZnO:Si in the starting material. Analysis reveal the role of ZnO and amorphous silicon interface in contributing to relatively…
We report on the electrical properties of polycrystalline NbO2 thin film vertical devices grown on TiN coated SiO2/Si substrates using pulsed laser deposition. First, we analyzed the thickness and contact size dependences of threshold…
Ni thin films grown by thermal evaporation and sputtering under different deposition conditions are characterized for structural and morphological properties using X-ray diffraction (XRD) and atomic force microscopy (AFM) techniques. XRD…
Growth of Co film on SiO2 substrates with the surface roughness of 0.5 nm and 1.6 nm has been studied in situ using the magneto-optical Kerr effect (MOKE) and four probe resistivity measurements. In-situ measurements jointly suggest the…
A series of electron-doped cuprate La(2-x)CexCuO4 thin films with different thicknesses have been fabricated and their annealing time are adjusted carefully to ensure the highest superconducting transition temperature. The transport…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
In this work, the authors fabricated Cu2O porous nanostructured films (PNFs) on glass slide substrates by the newly developed positive bias deposition approach in a balanced magnetron sputtering (MS) system. It was found that the surface…
We have carried out extensive comparative studies of the structural and transport properties of CaRuO$_3$ thin films grown under various oxygen pressure. We find that the preferred orientation and surface roughness of the films are strongly…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…