Related papers: Angular resolution measurements at SPring-8 of a h…
The optics of a number of future X-ray telescopes will have very long focal lengths (10 - 20 m), and will consist of a number of nested/stacked thin, grazing-incidence mirrors. The optical quality characterization of a real mirror can be…
The imaging sharpness of an X-ray telescope is chiefly determined by the optical quality of its focusing optics, which in turn mostly depends on the shape accuracy and the surface finishing of the grazing-incidence X-ray mirrors that…
Simbol-X will push grazing incidence imaging up to 80 keV, providing a strong improvement both in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. The superb hard X-ray imaging…
Astronomical imaging with micro-arcsecond ($\mu$as) angular resolution could enable breakthrough scientific discoveries. Previously-proposed $\mu$as X-ray imager designs have been interferometers with limited effective collecting area. Here…
The LAMP (Lightweight Asymmetry and Magnetism Probe) X-ray telescope is a mission concept to measure the polarization of X-ray astronomical sources at 250 eV via imaging mirrors that reflect at incidence angles near the polarization angle,…
One of the problems often encountered in X-ray mirror manufacturing is setting proper manufacturing tolerances to guarantee an angular resolution - often expressed in terms of Point Spread Function (PSF) - as needed by the specific science…
X-ray mirrors are usually built in the Wolter I (paraboloid-hyperboloid) configuration. This design exhibits no spherical aberration on-axis but suffers from field curvature, coma and astigmatism, therefore the angular resolution degrades…
We have developed X-ray telescope mirrors using an original electroforming replication technique established through the fabrication of millimeter-aperture, ultra-short-focal-length nanofocusing mirrors for synchrotron X-ray microscopy.…
We are developing instrumentation for a telescope design capable of measuring linear X-ray polarization over a broad-band using conventional spectroscopic optics. Multilayer-coated mirrors are key to this approach, being used as Bragg…
The imaging performance of X-ray optics (expressed in terms of HEW, Half-Energy-Width) can be severely affected by X-ray scattering caused by the surface roughness of the mirrors. The impact of X-ray scattering has an increasing relevance…
We present a concept of the X-ray imaging system with high angular-resolution and moderate sensitivity. In this concept, a two-dimensional detector, i.e., imager, is put at a slightly out-of-focused position of the focusing mirror, rather…
Future X-ray telescopes like SIMBOL-X will operate in a wide band of the X-ray spectrum (from 0.1 to 80 keV); these telescopes will extend the optical performances of the existing soft X-ray telescopes to the hard X-ray band, and in…
X-ray mirrors with high focusing performances are in use in both mirror modules for X-ray telescopes and in synchrotron and FEL (Free Electron Laser) beamlines. A degradation of the focus sharpness arises in general from geometrical…
The Astronomical Roentgen Telescope X-ray Concentrator (ART-XC) is a hard X-ray telescope with energy response up to 30 keV, to be launched on board the Spectrum Roentgen Gamma (SRG) spacecraft in 2018. ART-XC consists of seven identical…
SIMBOL-X is a hard X-ray mission, operating in the 0.5-70 keV range, which is proposed by a consortium of European laboratories for a launch around 2010. Relying on two spacecraft in a formation flying configuration, SIMBOL-X uses a 30 m…
Recent advances in grazing incidence X-ray optics using synchrotron radiation sources have stimulated the need for basic research in high quality mirror materials for novel applications. In this paper we communicate the results of the first…
We report on a new x-ray imaging method, which combines the high spatial resolution of coherent diffraction imaging with the ability of dark field microscopy to map grains within thick polycrystalline specimens. An x-ray objective serves to…
One of the most important parameters defining the angular resolution of an X-ray optical module is its Half-Energy Width (HEW) as a function of the photon energy. Future X-ray telescopes with imaging capabilities (SIMBOL-X, Constellation-X,…
The focusing performance of X-ray optics (conveniently expressed in terms of HEW, Half Energy Width) strongly depend on both mirrors deformations and photon scattering caused by the microroughness of reflecting surfaces. In particular, the…
The Shanghai Synchrotron Radiation Facility (SSRF) contains a 3.5-GeV storage ring serving as a national X-ray synchrotron radiation user facility characterized by a low emittance and a low coupling. The stability and quality of the…