Related papers: Suppression of Surface-Originated Gate-Lag by a Du…
A dual-channel AlN/GaN/AlN/GaN high electron mobility transistor (HEMT) architecture is proposed, simulated, and demonstrated that suppresses gate lag due to surface-originated trapped charge. Dual two-dimensional electron gas (2DEG)…
Despite considerable advancements, high electron mobility transistors (HEMTs) based on gallium nitride (GaN) channels remain largely limited to power applications below 650 V. For higher power demands, the ultra-wide bandgap semiconductor…
High Electron Mobility Transistors (HEMTs) are most suitable for harsh environments as they operate reliably under extreme conditions such as high voltages, high temperatures, radiation exposure and corrosive atmospheres. In this article,…
We report a polarization-induced 2D electron gas (2DEG) at an epitaxial AlBN/GaN heterojunction grown on a SiC substrate. Using this 2DEG in a long conducting channel, we realize ultra-thin barrier AlBN/GaN high electron mobility…
Scaling down the GaN channel in a double heterostructure AlGaN/GaN/AlGaN High Electron Mobility Transistor (HEMT) to the thicknesses on the order of or even smaller than the Bohr radius confines electrons in the quantum well even at low…
Aluminum scandium nitride (AlScN) is a promising barrier material for gallium nitride (GaN)-based transistors for the next generation of radio-frequency electronic devices. In this work, we examine the transport properties of two…
We report on the potential of high electron mobility transistors (HEMTs) consisting of high composition AlGaN channel and barrier layers for power switching applications. Detailed 2D simulations show that threshold voltages in excess of 3 V…
The emerging wide bandgap BAlN alloys have potentials for improved III-nitride power devices including high electron mobility transistor (HEMT). Yet few relevant studies have been carried. In this work, we have investigated the use of the…
In this paper, we have characterized an AlGaN/GaN High Electron Mobility Transistor (HEMT) with a short gate length (Lg $\approx$ 0.15$\mu$m). We have studied the effect of short gate length on the small signal parameters, linearity…
A broad TCAD simulation analysis of a monolithic common drain bidirectional GaN HEMT was performed. We used gate-to-gate distances of 4 microns and 6 microns for the devices optimized with two field plates. The breakdown voltages were 675V…
In this work, AlGaN/GaN HEMTs with dual-layer SiNx stressors (composed of a low-stress layer and a high-stress layer) were investigated. The low-stress padding layer solved the surface damage problem caused during the deposition of the…
AlN has the largest bandgap in the wurtzite III-nitride semiconductor family, making it an ideal barrier for a thin GaN channel to achieve strong carrier confinement in field-effect transistors, analogous to silicon-on-insulator technology.…
In this work, we demonstrate a passivation-free Ga-polar recessed-gate AlGaN/GaN HEMT on a sapphire substrate for W-band operation, featuring a 5.5 nm Al0.35Ga0.65N barrier under the gate and a 31 nm Al0.35Ga0.65N barrier in the gate access…
We report N-polar AlN-based high-electron mobility transistors (HEMTs) with a GaN channel thickness of 5.2 nm on N-polar AlN on sapphire. The threshold voltage is around -2.4 to -3.0 V with saturation currents over 240 mA/mm and on/off…
Short-term reliability and robustness of 110 nm AlN/GaN HEMTs has been evaluated by means of off-state, semi-on state and on-state step stress tests on devices having different gate-drain distance, LGD. While breakdown voltages and critical…
Thick metamorphic buffers are perceived to be indispensable for the heteroepitaxial integration of III-V semiconductors on silicon substrates with large thermal expansion and lattice mismatches. However, III-nitride buffers in conventional…
In this article, high composition (>35%) thick (>30 nm) barrier AlGaN/AlN/GaN HEMT structure grown on a sapphire substrate with ultra-low sheet resistivity (<250 \Omega / \Box ) is reported. Optimization of growth conditions, such as…
We investigate the influence of AlN buffer thickness on the structural, electrical, and thermal properties of AlGaN/GaN high-electron mobility transistors (HEMTs) grown on semi-insulating SiC substrates by metal-organic chemical vapor…
III-V heterostructure based high electron mobility transistors (HEMTs) offer superior performance as compared to CMOS silicon transistors owing to the high mobility in the 2D electron gas (2DEG) channel at the heterostructure interface.…
The characterization of deep levels in AlGaN/GaN heterostructures is one of the most important problems in GaN high electron mobility transistors (HEMTs) technology. This work reports on a technique for determination of deep level…