Related papers: Online aging study of high rate MRPC
As High-Performance Computing (HPC) systems strive towards the exascale goal, studies suggest that they will experience excessive failure rates. For this reason, detecting and classifying faults in HPC systems as they occur and initiating…
Nowadays, commonly used Resistive Plate Chambers (RPCs) have counting rate capabilities of ~10E4Hz/cm2 and position resolutions of ~1cm. We have developed small prototypes of RPCs (5x5 and 10x10cm2) having rate capabilities of up to…
The Large Area X-ray Proportional Counter (LAXPC) instrument on-board AstroSat has three nominally identical detectors for timing and spectral studies in the energy range of 3--80 keV. The performance of these detectors during the five…
Residential prosumers with PV-battery systems increasingly manage their electricity exchange with the power grid to minimize costs. This study investigates the performance of Model Predictive Control (MPC) and Rule-Based Control (RBC) under…
This communication describes test beam results, focusing on detection efficiency and timing precision, of common float glass timing Resistive Plate Chambers (tRPCs) exposed to a $2.7$~GeV proton beam and operated at above ambient…
We study the remote estimation of a linear Gaussian system over a channel that wears out over time and with every use. The sensor can either transmit a fresh measurement in the current time slot, restore the channel quality at the cost of…
Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global…
Long-lived charged massive particles (CHAMPs) appear in various particle physics models beyond the Standard Model. In this Letter, we discuss the prospects for studying the stopping and decaying events of such long-lived CHAMPs at the LHC…
Resistive Plate Chambers detectors are extensively used in several domains of Physics. In High Energy Physics, they are typically operated in avalanche mode with a high-performance gas mixture based on Tetrafluoroethane (C2H2F4), a…
In this paper, a method is proposed for on-line monitoring of the control updating period in fast-gradient-based Model Predictive Control (MPC) schemes. Such schemes are currently under intense investigation as a way to accommodate for…
Detailed tests and analysis of ageing effects of high irradiation dose on Multi-Strip Multi-Gap Resistive Plate Counters based on low resistivity glass electrodes were performed. MSMGRPC efficiency and cluster size before irradiation are…
We propose and analyze a real-time model predictive control (MPC) scheme that utilizes stored data to improve its performance by learning the value function online with stability guarantees. For linear and nonlinear systems, a learning…
A new readout technique was developed with the primary aim of keeping the number of channels in the front-end electronics as low as possible when scaling up the sensitive area of a Resistive Plate Chamber (RPC). The readout method here…
These days, while the landscape of discoveries at LHC has yet to be unveiled, planning for upgrades twenty years or more in advance towards a possible experimental scenario, might sound very imaginative and ambitious. Nevertheless, as plans…
The Multipurpose Detector (MPD) \cite{cite1.MPD_CDR} is designed to study of hot and dense baryonic matter in collisions of heavy ions over the atomic mass range 1--197 at the centre of mass energy up to $\sqrt{S_{NN}}$ = 11 GeV (for…
A Multi-gap Resistive Plate Chamber (MRPC) equipped with heaters to improve the counting rate capability was designed for the BM@N experiment in Dubna. The measurements were performed using a muon beam at IHEP U-70 accelerator in Protvino.…
This paper focuses on accelerated aging methods for magnet wire. Reliability of electrical devices such as coils, motors, relays, solenoids and transformers is heavily dependent on the Electrical Insulation System (EIS). Accelerated aging…
During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates,…
The intrinsic rate capability and the ageing properties of the Resistive Plate Chambers are closely related to the electrodes material and to the front-end electronics threshold. The development of a low noise pre-amplifier led us to…
The LUX (Large Underground Xenon) detector is a two-phase xenon Time Projection Chamber (TPC) designed to search for WIMP-nucleon dark matter interactions. As with all noble element detectors, continuous purification of the detector medium…