Related papers: Deformation behavior of Mg-8.5wt.%Al alloy under r…
Magnesium (Mg) and its alloys hold great potential as an energy-saving structural material for automative, aerospace applications. However, the use of Mg alloys has been limited due to poor ductility and formability. Poor mechanical…
The influence of the physical mechanisms activated during deformation and annealing on the microstructure and texture evolution as well as on the mechanical properties in the equiatomic CoCrFeMnNi high-entropy alloy (HEA) were investigated.…
One of the main material properties altered by rare earth additions in magnesium alloys is texture, which can be specifically adjusted to enhance ductility and formability. The current study aims at illuminating the texture selection…
Twinning is a primary deformation mechanism in Mg alloys. This study focuses on tension twins during uniaxial compression of Mg-Y alloys, with three key aspects: the orientation specificity of twin grains, the relative evolution of CRSS…
Strain-controlled fatigue of Mg-1Mn-0.5Nd (wt.\%) alloy were studied by experiment and simulation. The microstructure was made up of a dispersion of strongly texture grains (13\%) embedded in a matrix of grains with a random texture. The…
We provide a critical atomistic evidence of pseudoelastic behavior in complex solid-solution BCC Mo-W-Ta-Ti-Zr alloy. Prior to this work, only limited single-crystal BCC solids of pure metals and quaternary alloys have shown pseudoelastic…
Contraction twinning in magnesium alloys leads to new grains that are misoriented from the parent grain by a rotation of 56 deg around the a-axis. The classical theory of deformation twinning does not precise the atomic displacements and…
The deformation mechanisms of an extruded Mg-5Y-0.08Ca (wt. %) alloy were analyzed by means of micropillar compression tests on single crystals along different orientations -- selected to activate specific deformation modes -- as well as…
Metastable alloys, such as $\beta$-phase titanium (Ti) alloys with a body-centered cubic (BCC) lattice, can exhibit exceptional mechanical properties through the interplay of multiple deformation mechanisms -- diffusionless phase…
Plastic deformation of metallic alloys usually takes place through slip, but occasionally involves twinning. In particular, twinning is important in hexagonal close packed materials where the easy slip systems are insufficient to…
Deformation twinning is an important deformation mechanism in a variety of materials, including metals and ceramics. This deformation mechanism is particularly important in low-symmetry hexagonal close-packed (hcp) metals such as Magnesium…
A polycrystalline plasticity model, which incorporates the contribution of deformation twinning, is proposed. For this purpose, each material point is treated as a composite material consisting of a parent constituent and multiple twin…
A crystallographic displacive model is proposed for the extension twins in magnesium. It is based on a hard-sphere assumption previously used for martensitic transformations. The atomic displacements are established, and the homogeneous…
Tensile twinning is a main deformation mode in hexagonal close packed structure metals, so it is important to comprehensively understand twinning mechanisms which are not fully disclosed using 2D or small volume 3D characterization…
Deformation twinning in pure aluminum has been considered to be a unique property of nanostructured aluminum. A lingering mystery is whether deformation twinning occurs in coarse-grained or single-crystal aluminum, at scales beyond…
Deformation twinning is a form of permanent deformation that is commonly observed in low symmetry crystals such as hexagonal close-packed (hcp) metals. With recent increased interest in using hcp metals, such as magnesium, in structural,…
The objective of this work is to deconvolute the interaction of slip, twinning, and notch on the deformation response of an austenitic manganese (Hadfield) steel using detailed finite element simulations. The simulations employ a…
Titanium alloys are widely used in aerospace, biomedical, and energy applications owing to their high specific strength, corrosion resistance, and biocompatibility. Among them, $\alpha$-titanium alloys with a hexagonal close-packed (hcp)…
The effect of pre-ageing deformation on the size and distribution of beta-prime precipitates and subsequently on the resulting strength and ductility have been measured in a Mg-3.0at.%Zn-0.5at.%Y alloy. The alloy was extruded and then…
Plastic work partitioning was investigated in extruded AZ31B magnesium alloy under loading orientations promoting slip- or twinning-dominated deformation. Slip-dominated deformation exhibits stable plastic flow with approximately 50$\%$ of…