Related papers: Impact of micro-alloying on the plasticity of Pd-b…
Micro- or minor alloying of metallic glasses is of technological interest. An originally ductile Pd-based monolithic bulk metallic glass (Pd$_{40}$Ni$_{40}$P$_{20}$) was selectively manipulated by additions of Fe or Co. The alloying effects…
"Micro-alloying", referring to the addition of small concentration of a foreign metal to a given metallic glass, was used extensively in recent years to attempt to improve the mechanical properties of the latter. The results are haphazard…
In metallic glasses a clear correlation had been established between plasticity or ductility with the Poisson ratio and alternatively the ratio of the elastic bulk modulus to the shear modulus, K/G. Such a correlation between these two…
We studied solid solution effects on the mechanical properties of nanocrystalline (NC) $\mathrm{Pd}_{\mathrm{100-x}} \mathrm{Au}_{\mathrm{x}}$ alloys ($0 \leq \mathrm{x} < 50 \mathrm{at.\%}$) at the low end of the nanoscale. Concentration…
The usefulness of glasses, and particularly of metallic glasses, in technological applications is often limited by their toughness, which is defined as the area under the stress vs. strain curve before plastic yielding. Recently toughness…
The elastic properties of the Zr$_{50}$Cu$_{40}$Ag$_{10}$ metallic alloy, such as the bulk modulus $B$, the shear modulus $G$, the Young's modulus $E$ and the Poisson's ratio $\sigma$, are investigated by molecular dynamics simulation in…
The manner in which metallic glasses fail under external loading is known to correlate well with those glasses' Poisson's ratio $\nu$: low-$\nu$ (compressible) glasses typically feature brittle failure patterns with scarce plastic…
Various elastic coefficients of Au2O3 doped PbO-B2O3-SeO2:Er2O3 (PBSE) glass ceramics were evaluated as functions of Au2O3 content using ultrasonic velocity measurements. The elastic coefficients and micro-hardness showed a decreasing…
The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe…
The common notion suggests that metallic glasses (MGs) are a homogeneous solid at the macroscopic scale; however, recent experiments and simulations indicate that MGs contain nano-scale elastic heterogeneities. Despite the fundamental…
Predicting the failure and plasticity of solids remains a longstanding challenge, with broad implications for materials design and functional reliability. Disordered solids like metallic glasses can fail either abruptly or gradually without…
In this paper, compressive loading effects on the plasticity of Al-Cu alloy varying the crystal orientation of Al and alloying element (Cu) percentage are investigated using molecular dynamics approach. The alloying percentage of Cu are…
In glass, starting from a dependence of the Angell's fragility on the Poisson ratio [V. N. Novikov and A. P. Sokolov, Nature 431, 961 (2004)], and a dependence of the Poisson ratio on the atomic packing density [G. N. Greaves et al., Nat.…
A novel y-y'-y" dual-superlattice superalloy, with promising mechanical properties up to elevated temperatures was recently reported. The present work employs state of the art chemical and spatial characterization techniques to study the…
We study the uniaxial compressive behavior of disordered colloidal free-standing micropillars composed of a bidisperse mixture of 3 and 6 um polystyrene particles. Mechanical annealing of confined pillars enables variation of the packing…
The mechanical properties of amorphous solids like metallic glasses can be dramatically changed by adding small concentrations (as low as 0.1\%) of foreign elements. The glass-forming-ability, the ductility, the yield stress and the elastic…
Microcompression testing is used to probe the uniaxial stress-strain response of a nanocrystalline alloy, with an emphasis on exploring how grain size and grain boundary relaxation state impact the complete flow curve and failure behavior.…
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from…
Initial powder mixtures of Cu, Fe and Co are exposed to severe plastic deformation by high-pressure torsion to prepare solid solutions. A broad range of compositions is investigated, whereas this study aims at the synthesis of soft magnetic…
Achieving a balance between low density, high strength, and good ductility remains a major challenge in the development of structural materials. Ti-based bulk metallic glasses (BMGs) have attracted considerable attention due to their…