Related papers: Transient eddy current flow metering
We present a comprehensive numerical analysis of alternative transient eddy-current flowmetering methods for liquid metals. This type of flowmeter operates by tracking eddy-current markers excited by the magnetic field pulses in the flow of…
Eddy current flow meters (ECFM) are widely used for measuring the flow velocity of electrically conducting fluids. Since the flow induced perturbations of a magnetic field depend both on the geometry and the conductivity of the fluid,…
We present a concept and test results of an eddy-current flowmeter for liquid metals. The flow rate is determined by applying a weak ac magnetic field to a liquid metal flow and measuring the flow-induced phase disturbance in the external…
Harmonic and transient eddy currents in a liquid metal positioned above an excitation coil are determined by measuring the voltage drop in a simple potential probe. The resulting spatio-temporal eddy current field is compared with the…
We present a theory of single-magnet flowmeter for liquid metals and compare it with experimental results. The flowmeter consists of a freely rotating permanent magnet, which is magnetized perpendicularly to the axle it is mounted on. When…
We present the results of velocity measurements obtained by ultrasonic Doppler velocimetry and local potential probes in the flow of GaInSn eutectic melt driven by a two-phase inductor in a cylindrical container. This type of flow is…
An analytical method of calculating eddy current in a metallic spinning gyroscope in external magnetic field is presented. With reasonable assumptions, the problem is simplified from the time-dependent one governed by Maxwell equations to…
The transient response from a transmitter-receiver coil system inside a multi-layer cylindrical conductive configuration is obtained. The particular set-up applies to well logging as well as to eddy current tube testing. In this work, a…
Flux loops have been installed on selected segments of the magnetic flux return yoke of the 4 T superconducting coil of the Compact Muon Solenoid (CMS) detector under construction at CERN. Voltages induced in the loops during discharge of…
Eddy current separation (ECS) is a process used throughout the scrap recycling industry for separating nonferrous metals from nonmetallic fluff. To date, however, the physical theory of ECS has generally been limited to empirical…
Measurement techniques such as Magnetic Resonance Velocimety (MRV) and Magnetic Resonance Concentration (MRC) are useful for obtaining 3D time-averaged flow quantities in complex turbulent flows, but cannot measure turbulent correlations or…
We discuss the well-posedness of the 'transient eddy current' magneto-quasistatic approximation of Maxwell's initial value problem with bounded and measurable conductivity, with sources, on a domain. We prove existence and uniqueness of…
Eddy currents induced in electrically conductive objects can be used to locate metallic objects as well as to assess the properties of materials non-destructively without physical contact. This technique is useful for material…
Heat and momentum transfer of low-Prandtl-number fluid ($Pr=0.029$) in a closed rectangular cavity ($100\times60\times10$ mm$^3$) heated at one side and cooled at the opposite side are analyzed. The electromagnetic forces into the liquid…
In a cylindrical container filled with an eutectic GaInSn alloy, an electro-vortex flow (EVF) is generated by the interaction of a non-uniform current with its own magnetic field. In this paper, we investigate the EVF phenomenon numerically…
This study is a continuation of the combined experimental and numerical investigation [1] of the flow of the eutectic GaInSn alloy inside a cylindrical vessel exposed to a constant electrical current. The emerging electrovortex flow driven…
We present a concept of an electromagnetic phase-shift flowmeter that has a significantly reduced sensitivity to the variation of the electrical conductivity of a liquid metal. A simple theoretical model of the flowmeter is considered where…
A novel methodology, named the diffusion profile method, is proposed in this research to measure the electric field of a low gain avalanche detector (LGAD).The proposed methodology utilizes the maximum of the time derivative of the edge…
Computing the electric eddy currents in non-linear materials, such as superconductors, is \E{not straightforward}. The design of superconducting magnets and power applications needs electromagnetic computer modeling, being in many cases a…
This study presents numerical simulations and experiments considering the flow of an electrically conducting fluid inside a cube driven by a rotating magnetic field (RMF). The investigations are focused on the spin-up, where a liquid metal…