Related papers: Criticality in the approach to failure in amorphou…
Upon loading, amorphous solids can exhibit brittle yielding, with the abrupt formation of macroscopic shear bands leading to fracture, or ductile yielding, with a multitude of plastic events leading to homogeneous flow. It has been recently…
Starting from a commensurate triangular thin solid strip, confined within two hard structureless walls, a stretch along its length introduces a rectangular distortion. Beyond a critical strain the solid fails through nucleation of…
Traditionally, the formation of amorphous shear bands (SBs) in crystalline materials has been undesirable, because SBs can nucleate voids and act as precursors to fracture. They also form as a final stage of accumulated damage. Only…
We demonstrate that plastic deformation in solids is associated with a dynamic transition that is reminiscent to the transition from a superconducting to a mixed phase in Type II superconductors. We report analytic calculations, extensive…
It is well known experimentally that well-quenched amorphous solids exhibit a plastic instability in the form of a catastrophic shear localization at a well defined value of the external strain. The instability may develop to a shear-band…
The elastic coupling between plastic events is generally invoked to interpret plastic properties and failure of amorphous soft glassy materials. We report an experiment where the emergence of a self-organized plastic flow is observed well…
Amorphous solids are known to fail catastrophically and in some situations, nano-scaled cavities are believed to play a significant role in the failure. In a recent work, using numerical simulations, we have shown the correspondence between…
We present results on a series of 2D atomistic computer simulations of amorphous systems subjected to simple shear in the athermal, quasistatic limit. The athermal quasistatic trajectories are shown to separate into smooth, reversible…
Using numerical simulations, we study the failure of an amorphous solid under quasi-static expansion starting from a homogeneous high-density state. During the volume expansion, we demonstrate the existence of instabilities manifesting via…
Recent experiments (Le Bouil et al., Phys. Rev. Lett., 2014, 112, 246001) have analyzed the statistics of local deformation in a granular solid undergoing plastic deformation. Experiments report strongly anisotropic correlation between…
What characterises a solid is its way to respond to external stresses. Ordered solids, such crystals, display an elastic regime followed by a plastic one, both well understood microscopically in terms of lattice distortion and dislocations.…
We numerically investigate the athermal creep deformation of amorphous materials having a wide range of stability. The imposed shear stress serves as the control parameter, allowing us to examine the time-dependent transient response…
Highly acurate numerical simulations are employed to highlight the subtle but important differences in the mechanical stability of perfect crystalline solids versus amorphous solids. We stress the difference between strain values at which…
The onset of irreversible deformation in low-temperature amorphous solids is due to the accumulation of elementary events, consisting of spacially and temporally localized atomic rearrangements involving only a few tens of atoms. Recently,…
Identifying the regions responsible for plastic flow in amorphous solids remains an open problem, since structural disorder seems to prevent the direct application of concepts such as dislocations, topological defects that successfully…
Thermodynamic equations for a solid and a solid continuum under stress are derived on the basis of a multicomponent mean field Markov process for thermofluctuation kinetics of microcracks. The resulting continuum is viscous elastoplastic…
``Shear softening" refers to the observed reduction in shear modulus when the stress on an amorphous solid is increased beyond the initial linear region. Careful numerical quasi-static simulations reveal an intimate relation between plastic…
The dynamic collapse of pores under shock loading is thought to be directly related to hot spot generation and material failure, which is critical to the performance of porous energetic and structural materials. However, the shock…
The isostatic state plays a central role in organizing the response of many amorphous materials. We demonstrate the existence of a dynamic critical length scale in nearly isostatic spring networks that is valid both above and below…
We predict a phenomenon of catastrophic material failure arising suddenly within an amorphous material, with an extremely long delay time since the material was last deformed. By simulating a mesoscopic soft glassy rheology model in one…