Related papers: Optimizing Data Aggregation for Uplink Machine-to-…
The growing popularity of Machine-to-Machine (M2M) communications in cellular networks is driving the need to optimize networks based on the characteristics of M2M, which are significantly different from the requirements that current…
We consider a multi-carrier and densely deployed small cell network, where small cells are powered by renewable energy source and operate in a full-duplex mode. We formulate an energy and traffic aware resource allocation optimization…
The optimal resource allocation scheme in a full-duplex Wireless Powered Communication Network (WPCN) composed of one Access Point (AP) and two wireless devices is analyzed and derived. AP operates in a full-duplex mode and is able to…
Future machine to machine (M2M) communications need to support a massive number of devices communicating with each other with little or no human intervention. Random access techniques were originally proposed to enable M2M multiple access,…
In this paper, we optimize the energy efficiency (bits/s/Hz/J) of device-to-multi-device (D2MD) wireless communications. While the device-to-device scenario has been extensively studied to improve the spectral efficiency in cellular…
Machine-to-Machine (M2M) communications is one of the key enablers of the Internet of Things (IoT). Billions of devices are expected to be deployed in the next future for novel M2M applications demanding ubiquitous access and global…
Maintaining multiple wireless connections is a promising solution to boost capacity in fifth-generation (5G) networks, where user equipment is able to consume radio resources of several serving cells simultaneously and potentially aggregate…
Machine-to-machine (M2M) wireless systems aim to provide ubiquitous connectivity between machine type communication (MTC) devices without any human intervention. Given the exponential growth of MTC traffic, it is of utmost importance to…
In this paper, we investigate resource allocation for multicarrier communication systems employing a full-duplex base station for serving multiple half-duplex downlink and uplink users simultaneously. We study the joint power and subcarrier…
Large multiple-input multiple-output (MIMO) networks promise high energy efficiency, i.e., much less power is required to achieve the same capacity compared to the conventional MIMO networks if perfect channel state information (CSI) is…
Machine-to-machine (M2M) communications are expected to provide ubiquitous connectivity between machines without the need of human intervention. To support such a large number of autonomous devices, the M2M system architecture needs to be…
In this paper, we consider a multiuser multiple-input multiple-output (MU-MIMO) communication system between a base station equipped with multiple antennas and multiple mobile users each equipped with a single antenna. The uplink scenario…
This paper investigates the cooperative full-duplex device-to-device (D2D) communication underlaying cellular network, where the cellular user (CU) acts as a full-duplex relay to assist the D2D communication. To simultaneously support D2D…
The mobile edge computing framework offers the opportunity to reduce the energy that devices must expend to complete computational tasks. The extent of that energy reduction depends on the nature of the tasks, and on the choice of the…
Energy harvesting multi-hop networks allow for perpetual operation of low cost, limited range wireless devices. Compared with their battery operated counterparts, the coupling of energy and data causality constraints with half duplex relay…
In cell-free massive multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems, user equipments (UEs) are served by many distributed access points (APs), where channels are correlated due to finite…
Device-to-device (D2D) underlaid cellular network, enabled with radio frequency energy harvesting (RFEH), and enhanced interference management schemes is a promising candidate to improve spectral and energy efficiency of next generation…
Energy-aware system design is an important optimization task for static and mobile Internet of Things (IoT)-based sensor nodes, especially for highly resource-constrained vehicles such as mobile robotic systems. For 4G/5G-based cellular…
This paper investigates uplink multiple access for the coexistence of enhanced mobile broadband+ (eMBB+) and massive machine-type communications+ (mMTC+) in terminal-centric cell-free massive MIMO (CF-mMIMO) systems. We propose a…
This paper studies multi-user wireless powered communication networks, where energy constrained users charge their energy storages by scavenging energy of the radio frequency signals radiated from a hybrid access point (H-AP). The energy is…