Related papers: Cold electron beams from cryo-cooled, alkali antim…
Thermal emittance measurements of a CsK2Sb photocathode at several laser wavelengths are presented. The emittance is obtained with a solenoid scan technique using a high voltage dc photoemission gun. The thermal emittance is 0.56+/-0.03…
Ultracold atom-based electron sources have recently been proposed as an alternative to the conventional photo-injectors or thermionic electron guns widely used in modern particle accelerators. The advantages of ultracold atom-based electron…
Achieving a low mean transverse energy or temperature of electrons emitted from the photocathode-based electron sources is critical to the development of next-generation and compact X-ray Free Electron Lasers and Ultrafast Electron…
Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and…
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline…
The generation of low-emittance electron beams has received significant interest in recent years. Driven by the requirements of X-ray free electron lasers, the emittance of photocathode injectors has been reduced significantly, with a…
We report a compact single-cell source of a continuous cold-atom beam with three-dimensional (3D) cooling. By integrating an off-axis moving optical molasses (OM) with a two-dimensional magneto-optical trap (MOT), we achieve simultaneous 3D…
We employ laser cooling to intensify and cool an atomic beam of metastable Ne(3s) atoms. Using several collimators, a slower and a compressor we achieve a ^{20}Ne^* flux of 6 10^{10} atoms/s in an 0.7 mm diameter beam traveling at 100 m/s,…
This White Paper seeks to extend the applications of two weakly bound semiconductor materials, Cs3Sb and Ag-O-Cs first developed decades ago for vacuum photodetectors S1, S-11 photocathodes, respectively, proven to have low electron-hole…
A cryogenic buffer gas beam, an electrostatic hexapole lens, and 2D transverse Doppler laser cooling are combined to produce a bright beam of barium monofluoride ($^{138}$Ba$^{19}$F) molecules. Experimental results and trajectory…
Producing high-brightness and high-charge (>100 pC) electron bunches at blowout regime requires ultrashort laser pulses with high fluence. The effects of laser pulse heating of the copper photocathode are analyzed in this paper. The…
We report on the growth and characterization of a new class of photocathode structures for application as electron sources to produce high brightness electron beams for accelerator applications. The sources are realized using III-Nitride…
We report optical evidence of cesium (Cs) evaporation from a bialkali (SbKCs) photo-cathode during controlled heating of a photomultiplier tube (PMT). A DFB laser scanned across the 852.113 nm Cs D2 line reveals absorption features only…
We demonstrate launching of laser-cooled Yb atoms in a continuous atomic beam. The continuous cold beam has significant advantages over the more-common pulsed fountain, which was also demonstrated by us recently. The cold beam is formed in…
A novel method of electron beam cooling is considered which can be used for linear colliders. The electron beam is cooled during collision with focused powerful laser pulse. With reasonable laser parameters (laser flash energy about 10 J)…
Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to…
We present a method for producing three-dimensional Bose-Einstein condensates using only laser cooling. The phase transition to condensation is crossed with $2.5 {\times} 10^{4}$ $^{87}\mathrm{Rb}$ atoms at a temperature of $T_{\mathrm{c}}…
We report on experiments generating a magneto-optical trap (MOT) of 88-strontium ($^{88}$Sr) atoms at microkelvin temperature, using integrated-photonics devices. With metasurface optics integrated on a fused-silica substrate, we generate…
The paper evaluates the thermal regime of a cryogenically cooled copper photocathode integrated into a continuous-wave superconducting radio-frequency injector cavity with direct thermal contact. Such a photoinjector layout is being…
For short, high-intensity electron bunches, alkali-tellurides have proved to be a reliable photo-cathode material. Measurements of lifetimes in an RF gun of the CLIC Test Facility II at field strengths greater than 100 MV/m are presented.…